Texas Instruments

TPS22915BYFPT

Power Management

Manufacturer
MPN
TPS22915BYFPT
Product Type
Package / Case
DSBGA-4
Key Attributes
5.5V, 2A, On-Resistance Load Switch

Technical Specifications

TypeDescription
Number of Channels1
Control Input LogicActive High
Maximum Continuous Current2A
Operating Temperature-40°C~+85°C
FeaturesOutput discharge function;Soft-start;Integrated charge pump
TypeDescription
Rds On Ohm37mΩ
Supply Voltage1.05V~5.5V
TypeLoad Switch
Package / CaseDSBGA-4

Product Introduction

The TPS22914/15 is a small, low-RON, single-channel load switch with controlled slew rate. The device incorporates an N-channel MOSFET that operates over an input voltage range of 1.05 V to 5.5 V and supports a maximum continuous current of 2A. The switch is controlled by a single enable input, allowing direct connection to low-voltage control signals.

The small footprint and low RON make this device ideal for space-constrained, battery-powered applications. The wide input voltage range makes it a versatile solution for a variety of voltage rails. The device's controlled rise time significantly reduces inrush current caused by large bulk load capacitances, thereby reducing or eliminating power supply droop. By integrating a 143Ω pull-down resistor for quick output discharge (QOD) when the switch is disabled, the TPS22915 further reduces overall solution size.

Features

  • Input voltage range: 1.05 V to 5.5 V
  • Low on-resistance (RON):
  • RON = 37mΩ (typical at VIN = 5V)
  • RON = 38mΩ (typical at VIN = 3.3V)
  • RON = 43mΩ (typical at VIN = 1.8V)
  • 2A maximum continuous switching current
  • Low quiescent current: 7.7μA (typical at VIN = 3.3V)
  • Low control input threshold compatible with GPIO interfaces at 1V or higher
  • Controlled slew rate:
  • tR(TPS22914B/15B) = 64μs at VIN = 3.3V
  • tR(TPS22914C/15C) = 913μs at VIN = 3.3V
  • Quick output discharge (TPS22915 only)
  • Ultra-small wafer-level chip-scale package: 0.78mm × 0.78mm, 0.4mm pitch, 0.5mm height (YFP)
  • ESD performance per JESD 22: 2kV HBM and 1kV CDM

Applications

  • Smartphones, mobile phones
  • Ultra-slim laptops, Ultrabooks/notebooks
  • Tablets, phablets
  • Wearable technology
  • Solid-state drives
  • Digital cameras

Datasheet

📄 Open Download

Alternative Parts

Common TPS22915BYFPT alternatives overseas buyers search for:

Compliance & Export Codes

TypeDetails
RoHSROHS3
ECCNEAR99
CNHTS8536500090
USHTS8536507000
TARIC8536500300
TypeDetails
CAHTS8536501000
BRHTS85365090
INHTS85365090
MXHTS8536.50.09

Sourcing Information

Sourcing TPS22915BYFPT from China? SZ Procure helps international buyers navigate the Shenzhen electronics market and locate suitable supplier options for specific component requirements.

Our Shenzhen sourcing team can help with supplier sourcing, availability checks and quotation comparison for TPS22915BYFPT, then coordinate procurement, supplier screening, inspection and international shipping based on what you need.

Looking to source TPS22915BYFPT? Submit an RFQ and let our Shenzhen sourcing team check available supplier options for you.