Texas Instruments

TPS22915BYFPR

Power Management

Manufacturer
MPN
TPS22915BYFPR
Product Type
Package / Case
DSBGA-4
Key Attributes
5.5-V, 2-A, 37-mΩ On-Resistance Load Switch

Technical Specifications

TypeDescription
Number of Channels1
Control Input LogicActive High
Maximum Continuous Current2A
Operating Temperature-40°C~+85°C
FeaturesSoft-start;Output discharge function;Integrated charge pump
TypeDescription
Rds On Ohm37mΩ
Supply Voltage1.05V~5.5V
TypeLoad Switch
Package / CaseDSBGA-4

Product Introduction

The TPS22914/15 is a small, low RON, single channel load switch with controlled slew rate. The device contains an N-channel MOSFET that can operate over an input voltage range of 1.05 V to 5.5 V and can support a maximum continuous current of 2 A. The switch is controlled by an on and off input, which is capable of interfacing directly with low-voltage control signals.

The small size and low RON makes the device ideal for being used in space constrained, battery powered applications. The wide input voltage range of the switch makes it a versatile solution for many different voltage rails. The controlled rise time of the device greatly reduces inrush current caused by large bulk load capacitances, thereby reducing or eliminating power supply droop. The TPS22915 further reduces the total solution size by integrating a 143-Ω pulldown resistor for quick output discharge (QOD) when the switch is turned off.

The TPS22914/15 is available in a small, spacesaving 0.78 mm × 0.78 mm, 0.4-mm pitch, 0.5-mm height 4-pin Wafer-Chip-Scale (WCSP) package (YFP). The device is characterized for operation over the free-air temperature range of -40°C to +105°C.

Features

  • Integrated Single Channel Load Switch
  • Input Voltage Range: 1.05 V to 5.5 V
  • Low On-Resistance (RON)
  • RON = 37 mΩ (Typical) at VIN = 5 V
  • RON = 38 mΩ (Typical) at VIN = 3.3 V
  • RON = 43 mΩ (Typical) at VIN = 1.8 V
  • 2-A Maximum Continuous Switch Current
  • Low Quiescent Current
  • 7.7 μA (Typical) at VIN = 3.3 V
  • Low Control Input Threshold Enables Use of 1 V or Higher GPIO
  • Controlled Slew Rate
  • tR (TPS22914B/15B) = 64 μs at VIN = 3.3 V
  • tR (TPS22914C/15C) = 913 μs at VIN = 3.3 V
  • Quick Output Discharge (TPS22915 only)
  • Ultra-Small Wafer-Chip-Scale Package 0.78 mm × 0.78 mm, 0.4-mm Pitch, 0.5-mm Height (YFP)
  • ESD Performance Tested per JESD 22
  • 2-kV HBM and 1-kV CDM

Applications

  • Smartphones, Mobile Phones
  • Ultrathin, Ultrabook/ Notebook PC
  • Tablet PC, Phablet
  • Wearable Technology
  • Solid State Drives Digital Cameras

Datasheet

📄 Open Download

Alternative Parts

Common TPS22915BYFPR alternatives overseas buyers search for:

Compliance & Export Codes

TypeDetails
RoHSROHS3
ECCNEAR99
CNHTS8536500090
USHTS8536507000
TARIC8536500300
TypeDetails
CAHTS8536501000
BRHTS85365090
INHTS85365090
MXHTS8536.50.09

Sourcing Information

Looking for a reliable source for TPS22915BYFPR from Texas Instruments? SZ Procure is a China electronics sourcing partner, helping international buyers source components through our supplier network in Shenzhen.

For TPS22915BYFPR, we can check current supplier availability, compare quotations from multiple sources, coordinate purchasing, and arrange pre-shipment inspection and shipment consolidation according to your requirements.

Need TPS22915BYFPR? Send us your required quantity and specifications for a sourcing check and quotation.