Microchip Technology

MCP2562FD-E/SN

Drivers, Receivers, Transceivers

Manufacturer
Microchip Technology
MPN
MCP2562FD-E/SN
Product Type
Drivers, Receivers, Transceivers
Package / Case
SOIC-8
Datasheet
MCP2562FD-E/SN Datasheet
Key Attributes
High-Speed CAN Flexible Data Rate Transceiver

Technical Specifications

TypeDescription
Working Voltage V5 V
Data Rate8000000
Iq A1.5e-05
number of channels1
Supply Current45mA
TypeDescription
TypeCAN FD Transceiver
Operating Temp-40°C ~ +125°C
FeaturesLow-power mode;Wake-up function;Short-Circuit Protection;Thermal shutdown protection;Undervoltage Protection;TXD dominant timeout;Integrated level shifting;ESD protection
Package / CaseSOIC-8

Product Introduction

The MCP2561/2FD is a high-speed CAN device, fault-tolerant device that serves as the interface between a CAN protocol controller and the physical bus. The MCP2561/2FD device provides differential transmit and receive capability for the CAN protocol controller, and is fully compatible with the ISO-11898-2 and ISO-11898-5 standards.

The Loop Delay Symmetry is guaranteed to support data rates that are up to 5 Mbps for CAN FD (Flexible Data rate). The maximum propagation delay was improved to support longer bus length.

Typically, each node in a CAN system must have a device to convert the digital signals generated by a CAN controller to signals suitable for transmission over the bus cabling (differential output). It also provides a buffer between the CAN controller and the high-voltage spikes that can be generated on the CAN bus by outside sources.

Features

  • Optimized for CAN FD (Flexible Data rate) at 2, 5 and 8 Mbps Operation - Maximum Propagation Delay: 120 ns - Loop Delay Symmetry: -10%/+10% (2 Mbps)
  • Implements ISO-11898-2 and ISO-11898-5 Standard Physical Layer Requirements
  • Very Low Standby Current (5 μA, typical)
  • VIO Supply Pin to Interface Directly to CAN Controllers and Microcontrollers with 1.8V to 5.5V I/O
  • SPLIT Output Pin to Stabilize Common Mode in Biased Split Termination Schemes
  • CAN Bus Pins are Disconnected when Device is Unpowered - An Unpowered Node or Brown-Out Event will Not Load the CAN Bus
  • Detection of Ground Fault: - Permanent Dominant Detection on TXD - Permanent Dominant Detection on Bus
  • Power-on Reset and Voltage Brown-Out Protection on VDD Pin
  • Protection Against Damage Due to Short-Circuit Conditions (Positive or Negative Battery Voltage)
  • Protection Against High-Voltage Transients in Automotive Environments
  • Automatic Thermal Shutdown Protection
  • Suitable for 12V and 24V Systems
  • Meets or exceeds stringent automotive design requirements including “Hardware Requirements for LIN, CAN and FlexRay Interfaces in Automotive Applications”, Version 1.3, May 2012 - Radiated emissions @ 2 Mbps with Common Mode Choke (CMC) - DPI @ 2 Mbps with CMC
  • High ESD Protection on CANH and CANL, meeting IEC61000-4-2 up to ±14 kV
  • Available in PDIP-8L, SOIC-8L and 3×3 DFN-8L
  • Temperature ranges: - Extended (E): -40°C to +125°C - High (H): -40°C to +150°C

Datasheet

📄 Open Download

Alternative Parts

Common MCP2562FD-E/SN alternatives overseas buyers search for:

Compliance & Export Codes

TypeDetails
RoHSROHS3
ECCNEAR99
CNHTS8542399000
USHTS8542390001
TARIC8542399000
TypeDetails
CAHTS8542390000
BRHTS85423999
INHTS85423900
MXHTS8542.39.99

Sourcing Information

Need MCP2562FD-E/SN from Microchip Technology for your next order? SZ Procure provides local sourcing support in Shenzhen — we help buyers check supplier availability, compare quotations, and coordinate procurement for China-sourced components.

When you need MCP2562FD-E/SN, SZ Procure can look into supplier options, confirm current availability, compare sourcing quotes and handle purchasing, pre-shipment inspection and consolidated shipment from Shenzhen.

Ready to source MCP2562FD-E/SN? Send your requirement through Request a Quote and we'll help check sourcing options and procurement costs.