XH2.5-2AB-RX
Connectors
Pitch: 2.5mm
Color: Beige
Pin Structure: 1x2P
Number of PINs: 2P
Number of PINs Per Row: 2
Number of Rows: 1
Current Rating: 3A
Voltage Rating (Max): 250V
Contact Plating: Tin
Operating Temperature: -25℃~+85℃
Reference Series: XH
Technical Specifications
| Type | Description |
|---|---|
| Reference Series | XH |
| Contact Material | Brass |
| Pins Per Row | 2 |
| Num Rows | 1 |
| Operating Temperature | -25°C~+85°C |
| Contact Plating | Tin |
| Color | Beige |
| Connector Type | Surface Mount,Vertical |
| Voltage Rating (Max) | 250V |
| Type | Description |
|---|---|
| Pitch | 2.5mm |
| Current Rating | 3A |
| Flame Retardant Rating | UL94V~0 |
| Supplementary Features | Auxiliary Solder Pin |
| Number of PINs | 2P |
| Plastic Material | LCP |
| X-Length of Bottom Edge on Board (Spacing Line) | 10mm |
| Pin Structure | 1x2P |
| Package / Case | SMD,P=2.5mm |
Product Introduction
The PCB thickness is 1.6mm with a 2P configuration. Technical specifications are as follows: plastic surfaces shall be smooth, free of flash, obvious sink marks, defects, and cracks; operating temperature: -25°C ~ 85°C; applicable wire gauge: AWG#28 ~ #22; rated voltage: 250V DC/AC(rms); rated current: 3.0A; contact resistance ≤20mΩ; withstanding voltage: 1000V AC/minute; insulation resistance ≥1000MΩ. General tolerances: x ±0.50, xx ±0.10, ±0.20, xxx ±0.05, angle ±1.
Features
- Smooth plastic surface, free of flash, sink marks, defects, and cracks
- Operating temperature: -25°C ~ 85°C
- Applicable wire gauge: AWG#28 ~ #22
- Rated voltage: 250V DC/AC(rms)
- Rated current: 3.0A
- Contact resistance: ≤20mΩ
- Dielectric withstanding voltage: 1000V AC/minute
- Insulation resistance: ≥1000MΩ
- General tolerance: x ±0.50, xx ±0.10, ±0.20, xxx ±0.05, angle ±1
Datasheet
Compliance & Export Codes
| Type | Details |
|---|---|
| CNHTS | 8536901100 |
| USHTS | 8536908585 |
| TARIC | 8536901000 |
| CAHTS | 8536900090 |
| Type | Details |
|---|---|
| BRHTS | 85369010 |
| INHTS | 85369010 |
| MXHTS | 8536.90.11 |
Sourcing Information
Sourcing XH2.5-2AB-RX from China? SZ Procure helps international buyers navigate the Shenzhen electronics market and locate suitable supplier options for specific component requirements.
When you need XH2.5-2AB-RX, SZ Procure can look into supplier options, confirm current availability, compare sourcing quotes and handle purchasing, pre-shipment inspection and consolidated shipment from Shenzhen. Before ordering, the listed specification(s) — Pitch 2.5mm — can be confirmed with the supplier against the actual part.
Ready to source XH2.5-2AB-RX? Send your requirement through Request a Quote and we'll help check sourcing options and procurement costs.