TXS0108ERGYR
Translators, Level Shifters
Technical Specifications
| Type | Description |
|---|---|
| Working Voltage V | 3.038 V |
| Interface | - |
| Number of Elements | 1 |
| output type | Open-drain;Push-Pull |
| Output Signal | - |
| Input Signal | - |
| Channel Type | Bidirectional |
| Type | Description |
|---|---|
| Number of Circuits | 8 |
| Current - Output High(IOH) | - |
| Current - Output Low(IOL) | - |
| Operating Temp | -40°C ~ +85°C |
| Data Rate | - |
| Features | Automatic direction detection;Output enable high-impedance;Integrated pull-up resistor |
| Package / Case | VQFN-20-EP |
Product Introduction
This 8-bit non-inverting translator uses two separate configurable power-supply rails. The A port tracks the VCCA pin supply voltage. The VCCA pin accepts any supply voltage between 1.2 V and 3.6 V. The B port tracks the VCCB pin supply voltage. The VCCB pin accepts any supply voltage between 1.65 V and 5.5 V. Two input supply pins allows for low Voltage bidirectional translation between any of the 1.2 V, 1.8 V, 2.5 V, 3.3 V, and 5 V voltage nodes.
When the output-enable (OE) input is low, all outputs are placed in the high-impedance (Hi-Z) state.
To ensure the Hi-Z state during power-up or powerdown periods, tie OE to GND through a pull-down resistor. The minimum value of the resistor is determined by the current-sourcing capability of the driver.
Features
- No Direction-Control Signal Needed
- Maximum Data Rates
- 110 Mbps (Push Pull)
- 1.2 Mbps (Open Drain)
- 1.2 V to 3.6 V on A Port and 1.65 V to 5.5 V on B Port (VCCA ≤ VCCB)
- No Power-Supply Sequencing Required – Either VCCA or VCCB Can Be Ramped First
- Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II
- ESD Protection Exceeds JESD 22 (A Port)
- 2000 V Human Body Model (A114-B)
- 150 V Machine Model (A115-A)
- 1000 V Charged-Device Model (C101)
- IEC 61000-4-2 ESD (B Port)
- ±8 kV Contact Discharge
- ±6 kV Air-Gap Discharge
Applications
- - Handsets - Smartphones - Tablets - Desktop PCs
Datasheet
Compliance & Export Codes
| Type | Details |
|---|---|
| RoHS | ROHS3 |
| ECCN | EAR99 |
| CNHTS | 8542399000 |
| USHTS | 8542390001 |
| TARIC | 8542399000 |
| Type | Details |
|---|---|
| CAHTS | 8542390000 |
| BRHTS | 85423999 |
| INHTS | 85423900 |
| MXHTS | 8542.39.99 |
Sourcing Information
Sourcing TXS0108ERGYR from China? SZ Procure helps international buyers navigate the Shenzhen electronics market and locate suitable supplier options for specific component requirements.
When you need TXS0108ERGYR, SZ Procure can look into supplier options, confirm current availability, compare sourcing quotes and handle purchasing, pre-shipment inspection and consolidated shipment from Shenzhen.
Ready to source TXS0108ERGYR? Send your requirement through Request a Quote and we'll help check sourcing options and procurement costs.