TXS0104ERGYR
Translators, Level Shifters
Technical Specifications
| Type | Description |
|---|---|
| Working Voltage V | 3.263 V |
| Data Rate | 24000000 |
| Interface | - |
| output type | Tri-State |
| Output Signal | - |
| Input Signal | - |
| Channel Type | Bidirectional |
| Type | Description |
|---|---|
| Number of Circuits | 4 |
| Current - Output High(IOH) | - |
| Current - Output Low(IOL) | - |
| Operating Temp | -40°C ~ +85°C |
| Number of Elements | - |
| Features | Automatic direction detection;Output enable high-impedance;Integrated pull-up resistor |
| Package / Case | VQFN-14-EP |
Product Introduction
This 4-bit non-inverting translator uses two separate configurable power-supply rails. The A port is designed to track V(CCA). V(CCA) accepts any supply voltage from 1.65 V to 3.6 V. V(CCA) must be less than or equal to V(CCB). The B port is designed to track V(CCB). V(CCB) accepts any supply voltage from 2.3 V to 5.5 V. This allows for low-voltage bidirectional translation between any of the 1.8-V, 2.5-V, 3.3-V, and 5-V voltage nodes.
When the output-enable (OE) input is low, all outputs are placed in the high-impedance state.
The TXS0104E is designed so that the OE input circuit is supplied by V(CCA).
To ensure the high-impedance state during power up or power down, OE should be tied to GND through a pulldown resistor; the minimum value of the resistor is determined by the current-sourcing capability of the driver.
Features
- No Direction-Control Signal Needed
- Max Data Rates 24 Mbps (Push Pull) 2 Mbps (Open Drain)
- Available in the Texas Instruments NanoFree™ Package
- 1.65 V to 3.6 V on A port and 2.3 V to 5.5 V on B port (V(CCA) ≤ V(CCB))
- No Power-Supply Sequencing Required – V(CCA) or V(CCB) Can Be Ramped First
- Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II
- ESD Protection Exceeds JESD 22
- A Port 2000-V Human-Body Model (A114-B) 200-V Machine Model (A115-A) 1000-V Charged-Device Model (C101)
- B Port 15-kV Human-Body Model (A114-B) 200-V Machine Model (A115-A) 1000-V Charged-Device Model (C101)
- IEC 61000-4-2 ESD (B Port)
- ±8-kV Contact Discharge ±10-kV Air-Gap Discharge
Applications
- - Handset - Smartphone - Tablet - Desktop PC
Datasheet
Compliance & Export Codes
| Type | Details |
|---|---|
| RoHS | ROHS3 |
| ECCN | EAR99 |
| CNHTS | 8542399000 |
| USHTS | 8542390001 |
| TARIC | 8542399000 |
| Type | Details |
|---|---|
| CAHTS | 8542390000 |
| BRHTS | 85423999 |
| INHTS | 85423900 |
| MXHTS | 8542.39.99 |
Sourcing Information
Looking for a reliable source for TXS0104ERGYR from Texas Instruments? SZ Procure is a China electronics sourcing partner, helping international buyers source components through our supplier network in Shenzhen.
When you need TXS0104ERGYR, SZ Procure can look into supplier options, confirm current availability, compare sourcing quotes and handle purchasing, pre-shipment inspection and consolidated shipment from Shenzhen.
Ready to source TXS0104ERGYR? Send your requirement through Request a Quote and we'll help check sourcing options and procurement costs.