TXS0104EPWR
Translators, Level Shifters
Technical Specifications
| Type | Description |
|---|---|
| Working Voltage V | 3.263 V |
| Data Rate | 24000000 |
| Interface | - |
| Number of Elements | 1 |
| output type | Open-drain;Push-Pull |
| Output Signal | - |
| Input Signal | - |
| Type | Description |
|---|---|
| Channel Type | Bidirectional |
| Number of Circuits | 4 |
| Current - Output High(IOH) | - |
| Current - Output Low(IOL) | - |
| Operating Temp | -40°C ~ +85°C |
| Features | Automatic direction detection;Output enable high-impedance;Integrated pull-up resistor |
| Package / Case | TSSOP-14 |
Product Introduction
This 4-bit non-inverting translator uses two separate configurable power-supply rails. The A port is designed to track VCCA. VCCA accepts any supply voltage from 1.65 V to 3.6 V. VCCA must be less than or equal to VCCB. The B port is designed to track VCCB. VCCB accepts any supply voltage from 2.3 V to 5.5 V. This allows for low-voltage bidirectional translation between any of the 1.8-V, 2.5-V, 3.3-V, and 5-V voltage nodes.
When the output-enable (OE) input is low, all outputs are placed in the high-impedance state.
The TXS0104E is designed so that the OE input circuit is supplied by VCCA.
To ensure the high-impedance state during power up or power down, OE should be tied to GND through a pulldown resistor; the minimum value of the resistor is determined by the current-sourcing capability of the driver.
Features
- No Direction-Control Signal Needed
- Max Data Rates:
- 24 Mbps (Push Pull)
- 2 Mbps (Open Drain)
- Available in the Texas Instruments NanoFree Package
- 1.65 V to 3.6 V on A port and 2.3 V to 5.5 V on B port (VCCA ≤ VCCB)
- No Power-Supply Sequencing Required, VCCA or VCCB Can Be Ramped First
- Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II
- ESD Protection Exceeds JESD 22:
- A Port:
- 2000-V Human-Body Model (A114-B)
- 200-V Machine Model (A115-A)
- 1000-V Charged-Device Model (C101)
- B Port:
- 15 kV Human-Body Model (A114-B)
- 200-V Machine Model (A115-A)
- 1000-V Charged-Device Model (C101)
- IEC 61000-4-2 ESD (B Port):
- ±8-kV Contact Discharge
- ±10-kV Air-Gap Discharge
Applications
- - Handset - Smartphone - Tablet - Desktop PC
Datasheet
Alternative Parts
Common TXS0104EPWR alternatives overseas buyers search for:
Compliance & Export Codes
| Type | Details |
|---|---|
| RoHS | ROHS3 |
| ECCN | EAR99 |
| CNHTS | 8542399000 |
| USHTS | 8542390001 |
| TARIC | 8542399000 |
| Type | Details |
|---|---|
| CAHTS | 8542390000 |
| BRHTS | 85423999 |
| INHTS | 85423900 |
| MXHTS | 8542.39.99 |
Sourcing Information
Looking for a reliable source for TXS0104EPWR from Texas Instruments? SZ Procure is a China electronics sourcing partner, helping international buyers source components through our supplier network in Shenzhen.
For TXS0104EPWR, we can check current supplier availability, compare quotations from multiple sources, coordinate purchasing, and arrange pre-shipment inspection and shipment consolidation according to your requirements.
Need TXS0104EPWR? Send us your required quantity and specifications for a sourcing check and quotation.