TXS0102DCUR
Translators, Level Shifters
Technical Specifications
| Type | Description |
|---|---|
| Working Voltage V | 3.263 V |
| Data Rate | 24000000 |
| Interface | I2C;SMBus;UART |
| Number of Elements | 1 |
| output type | Open-drain;Push-Pull |
| Output Signal | - |
| Input Signal | - |
| Type | Description |
|---|---|
| Channel Type | Bidirectional |
| Number of Circuits | 2 |
| Current - Output High(IOH) | - |
| Current - Output Low(IOL) | - |
| Operating Temp | -40°C ~ +85°C |
| Features | Automatic direction detection;Output enable high-impedance;Integrated pull-up resistor |
| Package / Case | VSSOP-8 |
Product Introduction
This two-bit non-inverting translator is a bidirectional voltage-level translator and can be used to establish digital switching compatibility between mixed-voltage systems. It uses two separate configurable powersupply rails, with the A ports supporting operating voltages from 1.65 V to 3.6 V while it tracks the VCCA supply, and the B ports supporting operating voltages from 2.3 V to 5.5 V while it tracks the VCCB supply. This allows the support of both lower and higher logic signal levels while providing bidirectional translation capabilities between any of the 1.8-V, 2.5-V, 3.3-V, and 5-V voltage nodes.
When the output-enable (OE) input is low, all I/Os are placed in the high-impedance state, which significantly reduces the power-supply quiescent current consumption.
To ensure the high-impedance state during power up or power down, OE should be tied to GND through a pulldown resistor; the minimum value of the resistor is determined by the current-sourcing capability of the driver.
Features
- No Direction-Control Signal Needed
- Max Data Rates 24 Mbps (Push Pull) 2 Mbps (Open Drain)
- Available in the Texas Instruments NanoStar Package
- 1.65 V to 3.6 V on A port and 2.3 V to 5.5 V on B port (VCCA ≤ VCCB)
- VCC Isolation Feature: If Either VCC Input Is at GND, Both Ports Are in the High-Impedance State
- No Power-Supply Sequencing Required: Either VCCA or VCCB Can Be Ramped First
- Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II
- ESD Protection Exceeds JESD 22
- A Port 2500-V Human-Body Model (A114-B) 250-V Machine Model (A115-A) 1500-V Charged-Device Model (C101)
- B Port 8-kV Human-Body Model (A114-B) 250-V Machine Model (A115-A) 1500-V Charged-Device Model (C101)
Applications
- - I2C/SMBus - UART - GPIO
Datasheet
Alternative Parts
Common TXS0102DCUR alternatives overseas buyers search for:
Compliance & Export Codes
| Type | Details |
|---|---|
| RoHS | ROHS3 |
| ECCN | EAR99 |
| CNHTS | 8542399000 |
| USHTS | 8542390001 |
| TARIC | 8542399000 |
| Type | Details |
|---|---|
| CAHTS | 8542390000 |
| BRHTS | 85423999 |
| INHTS | 85423900 |
| MXHTS | 8542.39.99 |
Sourcing Information
Sourcing TXS0102DCUR from China? SZ Procure helps international buyers navigate the Shenzhen electronics market and locate suitable supplier options for specific component requirements.
For TXS0102DCUR, we can check current supplier availability, compare quotations from multiple sources, coordinate purchasing, and arrange pre-shipment inspection and shipment consolidation according to your requirements.
Looking to source TXS0102DCUR? Submit an RFQ and let our Shenzhen sourcing team check available supplier options for you.