TXBN0304RSVR
Logic ICs
Technical Specifications
| Type | Description |
|---|---|
| Output Type | Tri-State |
| Output Signal | - |
| Input Signal | - |
| Channel Type | Bidirectional |
| Number of Circuits | 4 |
| Current - Output High(IOH) | - |
| Current - Output Low(IOL) | - |
| Type | Description |
|---|---|
| Interface | - |
| Operating Temperature | -40°C~+85°C |
| Data Rate | 100 Mbps |
| Number of Elements | 1 |
| Features | Automatic direction detection;Output enable high-impedance;Power-off protection |
| Supply Voltage | 900mV~3.6V |
| Package / Case | UQFN-16(1.8x2.6) |
Product Introduction
This 4-bit non-inverting translator uses two separate configurable power-supply rails. Port A is designed to track VCCA. VCCA accepts any supply voltage from 0.9V to 3.6V. Port B is designed to track VCCB. VCCB accepts any supply voltage from 0.9V to 3.6V. This allows any low-voltage bidirectional translation between the 1V, 1.2V, 1.5V, 1.8V, 2.5V, and 3V voltage nodes. For the TXB0304, when the output enable (OE) input is low, all outputs are in the high-impedance state. To ensure the high-impedance state during power-up or power-down, OE should be connected to GND through a pulldown resistor; the minimum value of this resistor depends on the current-sourcing capability of the driver. The OE device-control pin input circuit is powered by VCCA. This device is fully suitable for partial power-down applications using I0ff. The I0ff circuit disables the outputs to prevent damaging backflow current when the device is powered down. The only difference between the TXB0304 and TXBN0304 is that the OE signal is active high and active low, respectively.
Features
- Fully symmetrical supply voltage, 0.9V to 3.6V on both Port A and Port B
- VCC isolation feature – if either VCC input is grounded, all outputs are in high-impedance state
- Output enable (OE) input referenced to VCCA
- Low power consumption, 5μA maximum (ICCA or ICCB)
- Ioff supports partial power-down mode operation
- Latch-up performance exceeds 100mA (compliant with JESD 78 Class II specifications)
- ESD protection exceeds JESD 22 specifications – 8000V Human Body Model (A114-A), 1000V Charged Device Model (C101)
Applications
- Consumer Electronics
- Industrial
- Enterprise
- Telecom
Datasheet
Alternative Parts
Common TXBN0304RSVR alternatives overseas buyers search for:
Compliance & Export Codes
| Type | Details |
|---|---|
| RoHS | ROHS |
| ECCN | EAR99 |
| CNHTS | 8542399000 |
| USHTS | 8542390001 |
| TARIC | 8542399000 |
| Type | Details |
|---|---|
| CAHTS | 8542390000 |
| BRHTS | 85423999 |
| INHTS | 85423900 |
| MXHTS | 8542.39.99 |
Sourcing Information
Need TXBN0304RSVR from Texas Instruments for your next order? SZ Procure provides local sourcing support in Shenzhen — we help buyers check supplier availability, compare quotations, and coordinate procurement for China-sourced components.
When you need TXBN0304RSVR, SZ Procure can look into supplier options, confirm current availability, compare sourcing quotes and handle purchasing, pre-shipment inspection and consolidated shipment from Shenzhen.
Looking to source TXBN0304RSVR? Submit an RFQ and let our Shenzhen sourcing team check available supplier options for you.