TQL9092
Special Purpose Amplifiers
Technical Specifications
| Type | Description |
|---|---|
| Working Voltage V | 4.275 V |
| Operating Temp | -40°C ~ +105°C |
| Gain Db | 21.0 |
| Features | Fast enable control |
| Input Return Loss | 11dB |
| Frequency Range | 600MHz~4.2GHz |
| Type | Description |
|---|---|
| Output Return Loss | 17dB |
| Noise Figure | 0.65dB |
| Ip3 | 39dBm |
| P1Db | 19dBm |
| Current - Supply | 65mA |
| Package / Case | DFN-8-EP |
Product Introduction
The TQL9092 is a flat-gain, high-linearity, ultra-low noise amplifier in a small 2 x 2 mm surface-mount package. The LNA provides a gain flatness of 2 dB (peak-to-peak) over a wide bandwidth from 1.5 to 3.6GHz. At 2.6 GHz, the amplifier typically provides 22.6 dB gain, +39.5 dBm OIP3 at a 65 mA bias setting, and 0.6 dB noise figure. The LNA can be biased from a single positive supply ranging from 3.3 to 5 volts. The device is housed in a green/RoHS-compliant industry-standard 2x2 mm package.
The TQL9092 is internally matched using a high performance E-pHEMT process and only requires five external components for operation from a single positive supply: an external RF choke and blocking/bypass capacitors and a bias resistor going to pin 1. This LNA integrates a shut-down biasing capability to allow for operation in TDD applications.
The TQL9092 is optimized for linear performance across the 1.5 to 4.2 GHz frequency band but can operate down to 600 MHz.
Features
- 0.6-4.2 GHz Operational Bandwidth
- Ultra low noise figure, 0.6 dB NF @2.6 GHz
- >20 dB gain across 1.5 to 3.8 GHz
- Flat 2 dB gain variation across 1.5 to 3.6 GHz
- Bias adjustable for linearity optimization
- 37 dBm OIP3 at 65 mA IDD
- Shut-down mode pin with 1.8V TTL logic
- Unconditionally stable
- Integrated shutdown control pin
- Maintains OFF state with high Pin drive
- +3V to +5V supply; does not require -Vgg
Applications
- - Repeaters / DAS - Mobile Infrastructure LTE / WCDMA / CDMA / GSM - General Purpose Wireless - TDD or FDD systems
Datasheet
Compliance & Export Codes
| Type | Details |
|---|---|
| RoHS | ROHS |
| ECCN | 5A991B1 |
| CNHTS | 8542339000 |
| USHTS | 8542330001 |
| TARIC | 8542339000 |
| Type | Details |
|---|---|
| CAHTS | 8542330000 |
| BRHTS | 85423390 |
| INHTS | 85423300 |
| MXHTS | 8542.33.99 |
Sourcing Information
Sourcing TQL9092 from China? SZ Procure helps international buyers navigate the Shenzhen electronics market and locate suitable supplier options for specific component requirements.
When you need TQL9092, SZ Procure can look into supplier options, confirm current availability, compare sourcing quotes and handle purchasing, pre-shipment inspection and consolidated shipment from Shenzhen.
Ready to source TQL9092? Send your requirement through Request a Quote and we'll help check sourcing options and procurement costs.