TPS63030DSKR
Power Management
Technical Specifications
| Type | Description |
|---|---|
| Output Type | Adjustable |
| Output Current | 900 mA |
| Function | Buck-Boost |
| Switching Freq Hz | 2.4 MHz |
| Channels | 1 |
| Quiescent Current | 25 µA |
| Switch Tube (built-in/external) | Built-in |
| Type | Description |
|---|---|
| Operating Temperature | -40°C~+125°C@(TJ);-40°C~+85°C@(TA) |
| Features | Light load efficient mode;Frequency synchronization;Load disconnect;Overcurrent Protection |
| Topology | Buck-Boost |
| Supply Voltage | 1.8V~5.5V |
| Output Voltage | 1.2V~5.5V |
| Package / Case | SON-10-EP(2.5x2.5) |
Product Introduction
The TPS6303x devices provide a power supply solution for products powered by either a two-cell or three-cell alkaline, NiCd or NiMH battery, or a onecell Li-Ion or Li-polymer battery. Output currents can go as high as 600 mA while using a single-cell Li-Ion or Li-Polymer Battery, and discharge it down to 2.5V or lower. The buck-boost converter is based on a fixed frequency, pulse-width-modulation (PWM) controller using synchronous rectification to obtain maximum efficiency. At low load currents, the converter enters Power Save mode to maintain high efficiency over a wide load current range. The Power Save mode can be disabled, forcing the converter to operate at a fixed switching frequency. The maximum average current in the switches is limited to a typical value of 1000 mA. The output voltage is programmable using an external resistor divider, or is fixed internally on the chip. The converter can be disabled to minimize battery drain. During shutdown, the load is disconnected from the battery. The device is packaged in a 10-pin QFN PowerPAD package measuring 2.5mm×2.5mm (DSK).
Features
- Up to 96% Efficiency
- 800-mA Output Current at 3.3V in Step Down Mode (VIN = 3.6V to 5.5V)
- Up to 500-mA Output Current at 3.3V in Boost Mode (VIN > 2.4V)
- Automatic Transition Between Step Down and Boost Mode
- Device Quiescent Current less than 50μA
- Input Voltage Range: 1.8V to 5.5V
- Fixed and Adjustable Output Voltage Options from 1.2V to 5.5V
- Power Save Mode for Improved Efficiency at Low Output Power
- Forced Fixed Frequency Operation and Synchronization Possible
- Load Disconnect During Shutdown
- Over-Temperature Protection
- Available in Small 2.5mm x 2.5mm, QFN-10 Package
Applications
- All Two-Cell and Three-Cell Alkaline, NiCd or NiMH or Single-Cell Li Battery Powered Products
- Portable Audio Players
- PDAs
- Cellular Phones
- Personal Medical Products
- White LEDs
Datasheet
Alternative Parts
Common TPS63030DSKR alternatives overseas buyers search for:
Compliance & Export Codes
| Type | Details |
|---|---|
| RoHS | ROHS |
| ECCN | EAR99 |
| CNHTS | 8542399000 |
| USHTS | 8542390001 |
| TARIC | 8542399000 |
| Type | Details |
|---|---|
| CAHTS | 8542390000 |
| BRHTS | 85423999 |
| INHTS | 85423900 |
| MXHTS | 8542.39.99 |
Sourcing Information
Looking for a reliable source for TPS63030DSKR from Texas Instruments? SZ Procure is a China electronics sourcing partner, helping international buyers source components through our supplier network in Shenzhen.
For TPS63030DSKR, we can check current supplier availability, compare quotations from multiple sources, coordinate purchasing, and arrange pre-shipment inspection and shipment consolidation according to your requirements.
Need TPS63030DSKR? Send us your required quantity and specifications for a sourcing check and quotation.