TPS63020DSJR
Voltage Regulators - DC DC Switching Regulators
Technical Specifications
| Type | Description |
|---|---|
| Output Type | Adjustable |
| Output Voltage | 3.35 V |
| Output Current | 3 A |
| Function | Buck-Boost |
| Working Voltage V | 3.65 V |
| Switching Freq Hz | 2.4 MHz |
| Channels | 1 |
| Type | Description |
|---|---|
| Iq A | 5e-05 |
| Switch tube (built-in/external) | Built-in |
| Operating Temp | -40°C ~ +85°C @(TA) |
| Features | Frequency synchronization;Light load efficient mode;Operating status indication;Overcurrent Protection;Load disconnect |
| Topology | Buck-Boost |
| Package / Case | VSON-14-EP |
Product Introduction
The TPS6302x devices provide a power supply solution for products powered by either a two-cell or three-cell alkaline, NiCd or NiMH battery, or a one-cell Li-Ion or Li-polymer battery. Output currents can go as high as 3A while using a single-cell Li-Ion or Li-Polymer Battery, and discharge it down to 2.5V or lower. The buck-boost converter is based on a fixed frequency, pulse-width-modulation (PWM) controller using synchronous rectification to obtain maximum efficiency. At low load currents, the converter enters Power Save mode to maintain high efficiency over a wide load current range. The Power Save mode can be disabled, forcing the converter to operate at a fixed switching frequency. The maximum average current in the switches is limited to a typical value of 4A. The output voltage is programmable using an external resistor divider, or is fixed internally on the chip. The converter can be disabled to minimize battery drain. During shutdown, the load is disconnected from the battery. The device is packaged in a 14-pin QFN PowerPAD package measuring 3x4 mm (DSJ).
Features
- Up to 96% Efficiency
- 3A Output Current at 3.3V in Step Down Mode (VIN = 3.6V to 5.5V)
- More than 2A Output Current at 3.3V in Boost Mode (VIN > 2.5V)
- Automatic Transition Between Step Down and Boost Mode
- Dynamic Input Current Limit
- Device Quiescent Current less than 50μA
- Input Voltage Range: 1.8V to 5.5V
- Fixed and Adjustable Output Voltage Options from 1.2V to 5.5V
- Power Save Mode for Improved Efficiency at Low Output Power
- Forced Fixed Frequency Operation at 2.4MHz and Synchronization Possible
- Smart Power Good Output
- Load Disconnect During Shutdown
- Overtemperature Protection
- Overvoltage Protection
- Available in a 3x4 mm, QFN - 14 Package
Applications
- - All Two - Cell and Three - Cell Alkaline, NiCd or NiMH or Single - Cell Li Battery Powered Products - Ultra Mobile PCs and Mobile Internet Devices - Digital Media Players - DSCs and Camcorders - Cellular Phones and Smartphones - Personal Medical Products - Industrial Metering Equipment - High Power LEDs
Datasheet
Alternative Parts
Common TPS63020DSJR alternatives overseas buyers search for:
Compliance & Export Codes
| Type | Details |
|---|---|
| RoHS | ROHS |
| ECCN | EAR99 |
| CNHTS | 8542399000 |
| USHTS | 8542390001 |
| TARIC | 8542399000 |
| Type | Details |
|---|---|
| CAHTS | 8542390000 |
| BRHTS | 85423999 |
| INHTS | 85423900 |
| MXHTS | 8542.39.99 |
Sourcing Information
Need TPS63020DSJR from Texas Instruments for your next order? SZ Procure provides local sourcing support in Shenzhen — we help buyers check supplier availability, compare quotations, and coordinate procurement for China-sourced components.
Our Shenzhen sourcing team can help with supplier sourcing, availability checks and quotation comparison for TPS63020DSJR, then coordinate procurement, supplier screening, inspection and international shipping based on what you need.
Ready to source TPS63020DSJR? Send your requirement through Request a Quote and we'll help check sourcing options and procurement costs.