Texas Instruments

TPS62420DRCR

Voltage Regulators - DC DC Switching Regulators

Manufacturer
MPN
TPS62420DRCR
Package / Case
VSON-10-EP
Key Attributes
2.25-MHz 600-mA and 1000-mA Dual Step-Down Converter

Technical Specifications

TypeDescription
Output TypeAdjustable
Output Voltage3.3 V
Output Current0.8 A
FunctionStep-down type
Working Voltage V4.25 V
Switching Freq Hz2.25 MHz
Channels2
TypeDescription
Iq A3.2e-05
Switch tube (built-in/external)Built-in
Operating Temp-40°C ~ +85°C @(TA)
FeaturesDynamic voltage scaling;Light load efficient mode;Overcurrent Protection
TopologyBuck
Package / CaseVSON-10-EP

Product Introduction

The TPS6242x device is a synchronous dual stepdown DC–DC converter. It provides two independent output voltage rails powered by 1-cell Li-Ion or 3-cell NiMH/NiCD batteries. The device is also suitable to operate from a standard 3.3-V or 5-V voltage rail.

With an input voltage range of 2.5 V to 6 V, the TPS6242x is ideal for battery-powered portable applications like smart phones, PDAs, and other portable equipment.

With the EasyScale serial interface the output voltages can be modified during operation. It therefore supports dynamic voltage scaling for low power DSP and processors.

The TPS6242x operates at 2.25-MHz fixed switching frequency and enter the power-save mode operation at light load currents to maintain high efficiency over the entire load current range. For low-noise applications the devices can be forced into fixedfrequency PWM mode by pulling the MODE/DATA pin High. In the shutdown mode, the current consumption is reduced to 1.2 μA. The device allows the use of small inductors and capacitors to achieve a small solution size.

The TPS6242x operates over a free-air temperature range of -40°C to 85°C. It is available in a 10-pin leadless package 3 mm×3 mm vSON.

Features

  • High Efficiency up to 95%
  • VIN Range from 2.5 V to 6 V
  • 2.25-MHz Fixed Frequency Operation
  • Output Current 600 mA and 1000 mA
  • Adjustable Output Voltage from 0.6 V to VIN
  • Pin Selectable Output Voltage
  • Supports Simple Dynamic Voltage Scaling
  • Optional EasyScale One-Pin Serial Interface for Dynamic Output Voltage Adjustment
  • Power-Save Mode at Light Load Currents
  • 180° Out of Phase Operation
  • Output Voltage Accuracy in PWM Mode ±1% Typical
  • 32 μA Quiescent Current for both Converters
  • 100% Duty Cycle for Lowest Dropout
  • Available in a 10-Pin VSON (3 mm×3 mm)

Applications

  • - Cell Phones, Smart-phones - PDAs, Pocket PCs - OMAP and Low Power DSP Supply - Portable Media Players - Digital Radios - Digital Cameras

Datasheet

📄 Open Download

Alternative Parts

Common TPS62420DRCR alternatives overseas buyers search for:

Compliance & Export Codes

TypeDetails
RoHSROHS3
ECCNEAR99
CNHTS8542399000
USHTS8542390001
TARIC8542399000
TypeDetails
CAHTS8542390000
BRHTS85423999
INHTS85423900
MXHTS8542.39.99

Sourcing Information

Sourcing TPS62420DRCR from China? SZ Procure helps international buyers navigate the Shenzhen electronics market and locate suitable supplier options for specific component requirements.

When you need TPS62420DRCR, SZ Procure can look into supplier options, confirm current availability, compare sourcing quotes and handle purchasing, pre-shipment inspection and consolidated shipment from Shenzhen.

Looking to source TPS62420DRCR? Submit an RFQ and let our Shenzhen sourcing team check available supplier options for you.