TPS57114CQRTERQ1
Power Management
Technical Specifications
| Type | Description |
|---|---|
| Output Type | Adjustable |
| Output Current | 4 A |
| Function | Step-down type |
| Switching Freq Hz | 2 MHz |
| Channels | 1 |
| Quiescent Current | 515 µA |
| Switch Tube (built-in/external) | Built-in |
| Type | Description |
|---|---|
| Operating Temperature | -40°C~+125°C@(TA) |
| Features | Frequency synchronization;Adjustable soft-start;Operating status indication;Cycle-by-cycle current limiting;Overcurrent Protection |
| Topology | Buck |
| Supply Voltage | 2.95V~6V |
| Output Voltage | 800mV~6V |
| Package / Case | WQFN-16-EP(3x3) |
Product Introduction
The TPS57114C-Q1 is a fully featured 6V, 4A synchronous step-down current-mode converter with two integrated MOSFETs.
The TPS57114C-Q1 integrates MOSFETs to minimize external component count through current-mode control implementation, reduces inductor size by enabling switching frequencies up to 2MHz, and minimizes IC footprint with a compact 3mm × 3mm thermally enhanced QFN package, enabling small solution sizes.
The TPS57114C-Q1 provides precise regulation with a voltage reference (V_REF) accuracy of ±1% for a wide range of loads across the full operating temperature range.
Efficiency is maximized through integrated 12mΩ MOSFETs and a typical quiescent current of 515μA. Using the enable pin, shutdown supply current can be reduced to 5.5μA by entering shutdown mode.
The internal UVLO is set at 2.45V, but this threshold can be raised via a resistor network on the enable pin. The soft-start pin controls the output voltage startup ramp. An open-drain power-good signal indicates that the output is within 93% to 107% of the nominal voltage.
Frequency foldback and thermal shutdown protect the device from damage under overcurrent conditions.
Features
- Qualified for automotive applications with the following AEC-Q100 characteristics:
- Device temperature grade 1: -40°C to +125°C ambient operating temperature range
- Device HBM ESD classification level 2
- Device CDM ESD classification level C4B
- Functional safety capable
- Two 12mΩ (typical) MOSFETs delivering high efficiency at 4A load
- 200kHz to 2MHz switching frequency
- 0.8V ±1% voltage reference over operating temperature range (-40°C to +150°C)
- External clock synchronization
- Adjustable soft-start and sequencing
- Undervoltage (UV) and overvoltage (OV) power-good output
- 40°C to +150°C operating junction temperature range
- Thermally enhanced 3mm×3mm 16-pin WQFN package, pin-compatible with TPS54418
Applications
- Low-voltage, high-density power systems
- Point-of-load regulation for high-performance DSP, FPGA, ASIC, and microprocessors
- Broadband, networking, and fiber optic communication infrastructure
Datasheet
Alternative Parts
Common TPS57114CQRTERQ1 alternatives overseas buyers search for:
Compliance & Export Codes
| Type | Details |
|---|---|
| RoHS | ROHS3 |
| ECCN | EAR99 |
| CNHTS | 8542399000 |
| USHTS | 8542390001 |
| TARIC | 8542399000 |
| Type | Details |
|---|---|
| CAHTS | 8542390000 |
| BRHTS | 85423999 |
| INHTS | 85423900 |
| MXHTS | 8542.39.99 |
Sourcing Information
Looking for a reliable source for TPS57114CQRTERQ1 from Texas Instruments? SZ Procure is a China electronics sourcing partner, helping international buyers source components through our supplier network in Shenzhen.
Our Shenzhen sourcing team can help with supplier sourcing, availability checks and quotation comparison for TPS57114CQRTERQ1, then coordinate procurement, supplier screening, inspection and international shipping based on what you need.
Need TPS57114CQRTERQ1? Send us your required quantity and specifications for a sourcing check and quotation.