Texas Instruments

TPS54360DDAR

Voltage Regulators - DC DC Switching Regulators

Manufacturer
MPN
TPS54360DDAR
Package / Case
SOIC-8-EP
Key Attributes
60V Input, 3.5A Output Step-Down DC-DC Converter

Technical Specifications

TypeDescription
Output TypeAdjustable
Output Voltage29.8 V
Output Current3.5 A
FunctionStep-down type
Working Voltage V32.25 V
Switching Freq Hz2.5 MHz
Channels1
TypeDescription
Iq A0 A
Switch tube (built-in/external)Built-in
Operating Temp-40°C ~ +150°C @(TJ)
FeaturesCycle-by-cycle current limiting;Frequency synchronization;Light load efficient mode;Overcurrent Protection
TopologyBuck
Package / CaseSOIC-8-EP

Product Introduction

The TPS54360 is a 60 V, 3.5 A, step down regulator with an integrated high side MOSFET. The device survives load dump pulses up to 65V per ISO 7637. Current mode control provides simple external compensation and flexible component selection. A low ripple pulse skip mode reduces the no load supply current to 146 μA. Shutdown supply current is reduced to 2 μA when the enable pin is pulled low.

Undervoltage lockout is internally set at 4.3 V but can be increased using the enable pin. The output voltage start up ramp is internally controlled to provide a controlled start up and eliminate overshoot.

A wide switching frequency range allows either efficiency or external component size to be optimized. Frequency foldback and thermal shutdown protects internal and external components during an overload condition.

The TPS54360 is available in an 8-terminal thermally enhanced HSOIC PowerPAD package.

Features

  • 4.5 V to 60 V (65 V Abs Max) Input Range
  • 3.5 A Continuous Current, 4.5 A Minimum Peak Inductor Current Limit
  • Current Mode Control DC-DC Converter
  • 92-mΩ High-Side MOSFET
  • High Efficiency at Light Loads with Pulse Skipping
  • Eco-mode
  • Low Dropout at Light Loads with Integrated BOOT Recharge FET
  • 146 μA Operating Quiescent Current
  • 2 μA Shutdown Current
  • 100 kHz to 2.5 MHz Fixed Switching Frequency
  • Synchronizes to External Clock
  • Adjustable UVLO Voltage and Hysteresis
  • Internal Soft-Start
  • Accurate Cycle-by-Cycle Current Limit
  • Thermal, Overvoltage, and Frequency Foldback Protection
  • 0.8 V ± 0.8% Internal Voltage Reference
  • 8-Terminal HSOIC with PowerPAD Package
  • 40°C to 150°C TJ Operating Range
  • Supported by WEBENCH Software Tool

Applications

  • - 12 V, 24 V and 48 V Industrial, Automotive and Communications Power Systems

Datasheet

📄 Open Download

Alternative Parts

Common TPS54360DDAR alternatives overseas buyers search for:

Compliance & Export Codes

TypeDetails
RoHSROHS3
ECCNEAR99
CNHTS8542399000
USHTS8542390001
TARIC8542399000
TypeDetails
CAHTS8542390000
BRHTS85423999
INHTS85423900
MXHTS8542.39.99

Sourcing Information

Need TPS54360DDAR from Texas Instruments for your next order? SZ Procure provides local sourcing support in Shenzhen — we help buyers check supplier availability, compare quotations, and coordinate procurement for China-sourced components.

Our Shenzhen sourcing team can help with supplier sourcing, availability checks and quotation comparison for TPS54360DDAR, then coordinate procurement, supplier screening, inspection and international shipping based on what you need.

Need TPS54360DDAR? Send us your required quantity and specifications for a sourcing check and quotation.