TLV9002IDR
Instrumentation, Op Amps, Buffer Amps
Technical Specifications
| Type | Description |
|---|---|
| Iq A | 6e-05 |
| Input Offset Current(Ios) | 2pA |
| Ib - Input Bias Current | 5pA |
| Output Current | 0.04 A |
| Channels | 2.0 |
| Voffset V | 0.002 V |
| Slew Rate Vus | 2.0 |
| Operating Temp | -40°C ~ +125°C |
| Common Mode Rejection Ratio | 86.0 |
| Type | Description |
|---|---|
| Voffset Drift Uv | 600.0 |
| Gain Bandwidth Product | 1 MHz |
| Features | EMI filtering/RF suppression |
| Noise Nv | 30.0 |
| Dual Supply | -2.75V~-900mV;900mV~2.75V |
| Rail To Rail | Rail-to-Rail Input, Rail-to-Rail Output |
| Single Supply | 1.8V~5.5V |
| Package / Case | SOIC-8 |
Product Introduction
The TLV900x family includes single (TLV9001), dual (TLV9002), and quad-channel (TLV9004) low-voltage (1.8 V to 5.5 V) operational amplifiers (op amps) with rail-to-rail input and output swing capabilities. These op amps provide a cost-effective solution for space-constrained applications such as smoke detectors, wearable electronics, and small appliances where low-voltage operation and high capacitive-load drive are required. The capacitive-load drive of the TLV900x family is 500 pF, and the resistive open-loop output impedance makes stabilization easier with much higher capacitive loads. These op amps are designed specifically for low-voltage operation (1.8 V to 5.5 V) with performance specifications similar to the TLV600x devices.
The robust design of the TLV900x family simplifies circuit design. The op amps feature unity-gain stability, an integrated RFI and EMI rejection filter, and no-phase reversal in overdrive conditions.
The TLV900x devices include a shutdown mode (TLV9001S, TLV9002S and TLV9004S) that allow the amplifiers to switch off into standby mode with typical current consumption less than 1 μA.
Micro-size packages, such as SOT-553 and WSON, are offered for all channel variants (single, dual, and quad), along with industry-standard packages such as SOIC, MSOP, SOT-23, and TSSOP packages.
Features
- Scalable CMOS amplifier for low-cost applications
- Rail-to-rail input and output
- Low input offset voltage: ±0.4 mV
- Unity-gain bandwidth: 1 MHz
- Low broadband noise: 27 nV/√Hz
- Low input bias current: 5 pA
- Low quiescent current: 60 μA/Ch
- Unity-gain stable
- Internal RFI and EMI filter
- Operational at supply voltages as low as 1.8 V
- Easier to stabilize with higher capacitive load due to resistive open-loop output impedance
- Extended temperature range: -40°C to 125°C
Applications
- - Smoke detectors - Motion detectors - Wearable devices - Large and small appliances - EPOS - Barcode scanners - Sensor signal conditioning - Power modules - Personal electronics - Active filters - HVAC: heating, ventilating, and air conditioning - Motor control: AC induction - Low-side current sensing
Datasheet
Alternative Parts
Common TLV9002IDR alternatives overseas buyers search for:
Compliance & Export Codes
| Type | Details |
|---|---|
| RoHS | ROHS3 |
| ECCN | EAR99 |
| CNHTS | 8542339000 |
| USHTS | 8542330001 |
| TARIC | 8542339000 |
| Type | Details |
|---|---|
| CAHTS | 8542330000 |
| BRHTS | 85423390 |
| INHTS | 85423300 |
| MXHTS | 8542.33.99 |
Sourcing Information
Sourcing TLV9002IDR from China? SZ Procure helps international buyers navigate the Shenzhen electronics market and locate suitable supplier options for specific component requirements.
For TLV9002IDR, we can check current supplier availability, compare quotations from multiple sources, coordinate purchasing, and arrange pre-shipment inspection and shipment consolidation according to your requirements.
Ready to source TLV9002IDR? Send your requirement through Request a Quote and we'll help check sourcing options and procurement costs.