TLV62130ARGTR
Power Management
Technical Specifications
| Type | Description |
|---|---|
| Output Type | Adjustable |
| Output Current | 3 A |
| Function | Step-down type |
| Switching Freq Hz | 2.5 MHz |
| Channels | 1 |
| Quiescent Current | 19 µA |
| Switch Tube (built-in/external) | Built-in |
| Type | Description |
|---|---|
| Operating Temperature | -40°C~+85°C@(TA) |
| Features | Adjustable soft-start;Output voltage tracking;Operating status indication;Light load efficient mode;Overcurrent Protection |
| Topology | Buck |
| Supply Voltage | 3V~17V |
| Output Voltage | 900mV~5V |
| Package / Case | VQFN-16-EP(3x3) |
Product Introduction
The TLV62130 device is an easy-to-use synchronous step-down DC-DC converter optimized for high power density applications. The device features a typical switching frequency of up to 2.5MHz, allowing the use of small inductors, and provides fast transient response with high output voltage accuracy by leveraging DCS-Control™ topology.
This device supports a wide operating input voltage range of 3V to 17V, making it well suited for systems powered by lithium-ion or other batteries as well as 12V intermediate power rails. The output voltage ranges from 0.9V to 5V, supporting up to 3A continuous output current (using 100% duty cycle mode).
The output voltage startup ramp is controlled by the soft-start pin, enabling operation from an independent supply or in a tracking configuration. In addition, power sequencing can be implemented by configuring the enable pin and open-drain power-good pin.
In power save mode, the device generates approximately 19μA quiescent current based on VIN. The device automatically and seamlessly enters power save mode at light loads, maintaining high efficiency across the full load range. In shutdown mode, the device turns off with a supply current of less than 2μA during shutdown.
The device is available in a 3mm×3mm (RGT) 16-pin Very Thin Quad Flat No-Lead (VQFN) package.
Features
- DCS-Control™ topology input voltage range: 3V to 17V
- Output current up to 3A
- Adjustable output voltage range: 0.9V to 5V
- Pin-selectable output voltage (nominal, +5%)
- Programmable soft-start and tracking
- Seamless power-save mode transition
- 19μA quiescent current (typical)
- Selectable operating frequency
- Power-good output
- 100% duty cycle mode
- Short-circuit protection
- Thermal shutdown protection
- Pin-compatible with TPS62130, TLV62150
- 3mm×3mm QFN-16 package
Applications
- Standard 12V rail power supply
- Point-of-load (POL) power supply with single or multi-cell Li-ion batteries
- Motor drivers, electronic point-of-sale terminals
- Mobile PCs, tablets, modems, cameras
- TVs, set-top boxes, audio
Datasheet
Alternative Parts
Common TLV62130ARGTR alternatives overseas buyers search for:
Compliance & Export Codes
| Type | Details |
|---|---|
| RoHS | ROHS3 |
| ECCN | EAR99 |
| CNHTS | 8542399000 |
| USHTS | 8542390001 |
| TARIC | 8542399000 |
| Type | Details |
|---|---|
| CAHTS | 8542390000 |
| BRHTS | 85423999 |
| INHTS | 85423900 |
| MXHTS | 8542.39.99 |
Sourcing Information
Looking for a reliable source for TLV62130ARGTR from Texas Instruments? SZ Procure is a China electronics sourcing partner, helping international buyers source components through our supplier network in Shenzhen.
Our Shenzhen sourcing team can help with supplier sourcing, availability checks and quotation comparison for TLV62130ARGTR, then coordinate procurement, supplier screening, inspection and international shipping based on what you need.
Looking to source TLV62130ARGTR? Submit an RFQ and let our Shenzhen sourcing team check available supplier options for you.