TCA6408APWR
Interface ICs
Technical Specifications
| Type | Description |
|---|---|
| Interface | I2C;SMBus |
| Number of I/O | 8 |
| Quiescent Current | 1 µA |
| Interrupt Output | Interrupt Output |
| Number of Supporting Devices | 2 |
| Current - Output High(IOH) | 10mA |
| Type | Description |
|---|---|
| Operating Temperature | -40°C~+85°C |
| Output Type | Push-Pull |
| Features | Reset function;Built-in LED driver;IO level configurable;Cascade and address expansion |
| Supply Voltage | 1.65V~5.5V |
| Package / Case | TSSOP-16 |
Product Introduction
The TCA6408A is a 16-pin device that provides 8-bit general-purpose parallel I/O expansion for the two-wire bidirectional I2C bus (or SMBus) protocol. During device operation, both the I2C bus side (VCCI) and the P-port side (VCCP) can be powered by supplies ranging from 1.65V to 5.5V. This allows the TCA6408A to interface with next-generation microprocessors and microcontrollers on the SDA/SCL side, where supply voltages are being reduced to save power. Unlike the trend toward lower supply voltages for microprocessors and microcontrollers, some PCB components (such as LEDs) still require a 5V supply.
The device supports clock frequencies of 100kHz (standard mode) and 400kHz (fast mode). When additional I/O is needed for devices such as switches, sensors, buttons, LEDs, and fans, I/O expanders like the TCA6408A provide a simple solution.
Features
- I2C-to-parallel port expander
- Operating supply voltage range: 1.65V to 5.5V
- Supports bidirectional voltage-level translation and GPIO expansion between 1.8V, 2.5V, 3.3V, and 5V I2C bus and P-port
- 1μA low standby current consumption
- 5V-tolerant I/O ports
- 400kHz fast-mode I2C bus
- Hardware address pins allowing two TCA6408A devices on the same I2C/SMBus
- Active-low reset (RESET) input
- Open-drain active-low interrupt (INT) output
- Input and output configuration registers
- Polarity inversion register
- Internal power-on reset
- All channels configured as inputs at power-up
- Glitch-free power-up
- Noise filters on SCL and SDA inputs
- Latched outputs with maximum high-current drive capability for direct LED driving
- Latch-up performance exceeding 100mA per JESD78 Class II
- Schmitt-trigger inputs on SCL and SDA for slow input transitions and improved switching noise immunity
- ESD protection exceeding JESD22
- 2000V Human Body Model (A114-A)
- 1000V Charged Device Model (C101)
Applications
- Servers
- Routers (telecom switching equipment)
- Personal computers
- Personal electronics (gaming consoles)
- Industrial automation
- Products with GPIO-constrained processors
Datasheet
Compliance & Export Codes
| Type | Details |
|---|---|
| RoHS | ROHS3 |
| ECCN | EAR99 |
| CNHTS | 8542399000 |
| USHTS | 8542390001 |
| TARIC | 8542399000 |
| Type | Details |
|---|---|
| CAHTS | 8542390000 |
| BRHTS | 85423999 |
| INHTS | 85423900 |
| MXHTS | 8542.39.99 |
Sourcing Information
Need TCA6408APWR from Texas Instruments for your next order? SZ Procure provides local sourcing support in Shenzhen — we help buyers check supplier availability, compare quotations, and coordinate procurement for China-sourced components.
Our Shenzhen sourcing team can help with supplier sourcing, availability checks and quotation comparison for TCA6408APWR, then coordinate procurement, supplier screening, inspection and international shipping based on what you need.
Looking to source TCA6408APWR? Submit an RFQ and let our Shenzhen sourcing team check available supplier options for you.