Microchip Technology

TC4422AVOA713

Motor Driver ICs

MPN
TC4422AVOA713
Package / Case
SOIC-8
Key Attributes
9A High-Speed MOSFET Drivers

Technical Specifications

TypeDescription
Quiescent Current130 µA
Input Logic Level - Low800mV
Low Level Delay Time-
High Level Delay Time-
Input Logic Level - High2.4V
Driven Configuration-
Current - Output Low(IOL)10A
Rise Time28ns
TypeDescription
Fall Time26ns
Current - Output High(IOH)10A
Load TypeMOSFET
Supply Voltage4.5V~18V
Operating Temperature-40°C~+150°C
FeaturesInterleaved conduction protection
Package / CaseSOIC-8

Product Introduction

The TC4421A/TC4422A are improved versions of the earlier TC4421/TC4422 family of single-output MOSFET drivers. These devices are high-current buffer/drivers capable of driving large MOSFETs and Insulated Gate Bipolar Transistors (IGBTs). The TC4421A/TC4422A have matched output rise and fall times, as well as matched leading and falling-edge propagation delay times. The TC4421A/TC4422A devices also have very low cross-conduction current, reducing the overall power dissipation of the device.

These devices are essentially immune to any form of upset, except direct overvoltage or over-dissipation. They cannot be latched under any conditions within their power and voltage ratings. These parts are not subject to damage or improper operation when up to 5V of ground bounce is present on their ground terminals. They can accept, without damage or logic upset, more than 1A inductive current of either polarity being forced back into their outputs. In addition, all terminals are fully protected against up to 4 kV of electrostatic discharge.

The TC4421A/TC4422A inputs may be driven directly from either TTL or CMOS (3V to 18V). In addition, 300 mV of hysteresis is built into the input, providing noise immunity and allowing the device to be driven from slowly rising or falling waveforms.

With both surface-mount and pin-through-hole packages, in addition to a wide operating temperature range, the TC4421A/TC4422A family of 9A MOSFET drivers fit into most any application where high gate/line capacitance drive is required.

Features

  • High Peak Output Current: 10A (typ.)
  • Low Shoot-Through/Cross-Conduction Current in Output Stage
  • Wide Input Supply Voltage Operating Range: - 4.5V to 18V
  • High Continuous Output Current: 2A (max.)
  • Matched Fast Rise and Fall Times: - 15 ns with 4,700 pF Load - 135 ns with 47,000 pF Load
  • Matched Short Propagation Delays: 42 ns (typ.)
  • Low Supply Current: - With Logic ‘1’ Input – 130 μA (typ.) - With Logic ‘0’ Input - 33 μA (typ.)
  • Low Output Impedance: 1.2 Ω (typ.)
  • Latch-Up Protected: Will Withstand 1.5A Output Reverse Current
  • Input Will Withstand Negative Inputs Up To 5V
  • Pin-Compatible with the TC4420/TC4429 and TC4421/TC4422 MOSFET Drivers
  • Space-Saving, Thermally-Enhanced, 8-Pin DFN Package

Applications

  • Line Drivers for Extra Heavily-Loaded Lines
  • Pulse Generators
  • Driving the Largest MOSFETs and IGBTs
  • Local Power ON/OFF Switch
  • Motor and Solenoid Driver
  • LF Initiator

Datasheet

📄 Open Download

Alternative Parts

Common TC4422AVOA713 alternatives overseas buyers search for:

Compliance & Export Codes

TypeDetails
RoHSROHS3
ECCNEAR99
CNHTS8542399000
USHTS8542390001
TARIC8542399000
TypeDetails
CAHTS8542390000
BRHTS85423999
INHTS85423900
MXHTS8542.39.99

Sourcing Information

Sourcing TC4422AVOA713 from China? SZ Procure helps international buyers navigate the Shenzhen electronics market and locate suitable supplier options for specific component requirements.

Our Shenzhen sourcing team can help with supplier sourcing, availability checks and quotation comparison for TC4422AVOA713, then coordinate procurement, supplier screening, inspection and international shipping based on what you need.

Need TC4422AVOA713? Send us your required quantity and specifications for a sourcing check and quotation.