STMicroelectronics

STM32L071RBT6TR

Microcontrollers (MCU/MPU)

Manufacturer
MPN
STM32L071RBT6TR
Core Processor
ARM Cortex-M0+
Maximum Clock Speed
32 MHz
Package / Case
LQFP-64(10x10)
Key Attributes
Access line ultra-low-power 32-bit MCU Arm-based Cortex-M0+, up to 192KB Flash, 20KB SRAM, 6KB EEPROM, ADC

Technical Specifications

TypeDescription
Core ProcessorARM Cortex-M0+
Core Size32 bit
Maximum Clock Speed32 MHz
Program Storage Size128 KB
Number of I/O51
Flash TypeFLASH
TypeDescription
ADC (Bit)12 bit
Oscillator TypeBuilt-in
EEPROM6 KB
Operating Temperature-40°C~+85°C
Supply Voltage1.65V~3.6V
Package / CaseLQFP-64(10x10)

Product Introduction

This is an ultra-low-power platform based on an Arm 32-bit Cortex-M0+ core (with MPU), featuring multiple low-power modes, rich memory configurations, diverse peripheral interfaces, and a variety of package options.

Features

  • Ultra-low-power platform
  • 1.65 V to 3.6 V power supply
  • 40 to 125 °C temperature range
  • 0.29 μA Standby mode (3 wakeup pins)
  • 0.43 μA Stop mode (16 wakeup lines)
  • 0.86 μA Stop mode + RTC + 20-Kbyte RAM retention
  • Down to 93 μA/MHz in Run mode
  • 5 μs wakeup time (from Flash memory)
  • 41 μA 12-bit ADC conversion at 10 ksps
  • Core: Arm 32-bit Cortex®-M0+ with MPU
  • From 32 kHz up to 32 MHz max.
  • 0.95 DMIPS/MHz
  • Up to 192-Kbyte Flash memory with ECC (2 banks with read-while-write capability)
  • 20-Kbyte RAM
  • 6 Kbytes of data EEPROM with ECC
  • 20-byte backup register
  • Sector protection against R/W operation
  • Up to 84 fast I/Os (78 I/Os 5V tolerant)
  • Reset and supply management
  • Ultra-safe, low-power BOR (brownout reset) with 5 selectable thresholds
  • Ultra-low-power POR/PDR
  • Programmable voltage detector (PVD)
  • Clock sources
  • 1 to 25 MHz crystal oscillator
  • 32 kHz oscillator for RTC with calibration
  • High speed internal 16 MHz factory-trimmed RC (+/- 1%)
  • Internal low-power 37 kHz RC
  • Internal multispeed low-power 65 kHz to 4.2 MHz RC
  • PLL for CPU clock
  • Pre-programmed bootloader, USART, I2C, SPI supported
  • Rich Analog peripherals
  • 12-bit ADC 1.14 Msps up to 16 channels (down to 1.65 V)
  • 2x ultra-low-power comparators (window mode and wake up capability, down to 1.65 V)
  • 7-channel DMA controller, supporting ADC, SPI, I2C, USART, Timers
  • Up to 10x peripheral communication interfaces
  • 4x USART (2 with ISO 7816, IrDA)
  • 1x UART (low power)
  • Up to 6x SPI 16 Mbits/s
  • 3x I2C (2 with SMBus/PMBus)
  • 11x timers: 2x 16-bit with up to 4 channels, 2x 16-bit with up to 2 channels, 1x 16-bit ultra-low-power timer, 1x SysTick, 1x RTC, 2x 16-bit basic, and 2x watchdogs (independent/window)
  • CRC calculation unit, 96-bit unique ID
  • All packages are ECOPACK2

Datasheet

📄 Open Download

Alternative Parts

Common STM32L071RBT6TR alternatives overseas buyers search for:

Compliance & Export Codes

TypeDetails
RoHSROHS3
ECCN3A991A2
TypeDetails
CNHTS8542319090

Sourcing Information

Looking for a reliable source for STM32L071RBT6TR from STMicroelectronics? SZ Procure is a China electronics sourcing partner, helping international buyers source components through our supplier network in Shenzhen.

For STM32L071RBT6TR, we can check current supplier availability, compare quotations from multiple sources, coordinate purchasing, and arrange pre-shipment inspection and shipment consolidation according to your requirements.

Ready to source STM32L071RBT6TR? Send your requirement through Request a Quote and we'll help check sourcing options and procurement costs.