STMicroelectronics

STM32H743VIH6

Microcontrollers

Manufacturer
MPN
STM32H743VIH6
Product Type
Core Processor
ARM Cortex-M7
Maximum Clock Speed
480 MHz
Package / Case
TFBGA-100
Key Attributes
32-bit Arm Cortex-M7 480MHz MCUs, up to 2MB Flash, up to 1MB RAM, 46 com. and analog interfaces

Technical Specifications

TypeDescription
Core ProcessorARM Cortex-M7
Core Bits32
Maximum Clock Speed480 MHz
Flash Memory2.097 MB
Number of I/O82
Flash TypeFLASH
TypeDescription
Oscillator TypeBuilt-in
Eeprom Bytes-
Operating Temp-40°C ~ +85°C
Working Voltage V2.61 V
Package / CaseTFBGA-100

Product Introduction

32-bit Arm® Cortex®-M7 480MHz microcontroller, up to 2MB Flash, up to 1MB RAM, 46 communication and analog interfaces, featuring ST's advanced patented technology.

Features

  • Includes ST state-of-the-art patented technology
  • 32-bit Arm Cortex-M7 core with doubleprecision FPU and L1 cache: 16 Kbytes of data and 16 Kbytes of instruction cache; frequency up to 480 MHz, MPU, 1027 DMIPS/ 2.14 DMIPS/MHz (Dhrystone 2.1), and DSP instructions
  • Up to 2 Mbytes of Flash memory with read while-write support
  • Up to 1 Mbyte of RAM: 192 Kbytes of TCM RAM (inc. 64 Kbytes of ITCM RAM + 128 Kbytes of DTCM RAM for time critical routines), Up to 864 Kbytes of user SRAM, and 4 Kbytes of SRAM in Backup domain
  • Dual mode Quad-SPI memory interface running up to 133 MHz
  • Flexible external memory controller with up to 32-bit data bus: SRAM, PSRAM, SDRAM/LPSDR SDRAM, NOR/NAND Flash memory clocked up to 100 MHz in Synchronous mode
  • CRC calculation unit
  • ROP, PC-ROP, active tamper
  • Up to 168 I/O ports with interrupt capability
  • 3 separate power domains which can be independently clock-gated or switched off: D1: high-performance capabilities; D2: communication peripherals and timers; D3: reset/clock control/power management
  • 1.62 to 3.6 V application supply and I/Os
  • POR, PDR, PVD and BOR
  • Dedicated USB power embedding a 3.3 V internal regulator to supply the internal PHYs
  • Embedded regulator (LDO) with configurable scalable output to supply the digital circuitry
  • Voltage scaling in Run and Stop mode (6 configurable ranges)
  • Backup regulator (~0.9 V)
  • Voltage reference for analog peripherals V_REF+
  • Low-power modes: Sleep, Stop, Standby and V_BAT supporting battery charging
  • V_BAT battery operating mode with charging capability
  • CPU and domain power state monitoring pins
  • 2.95 μA in Standby mode (Backup SRAM OFF, RTC/LSE ON)
  • Internal oscillators: 64 MHz HSI, 48 MHz HSI48, 4 MHz CSI, 32 kHz LSI
  • External oscillators: 4 - 48 MHz HSE, 32.768 kHz LSE
  • 3x PLLs (1 for the system clock, 2 for kernel clocks) with Fractional mode
  • 3 bus matrices (1 AXI and 2 AHB)
  • Bridges (5x AHB2-APB, 2x AXI2-AHB)
  • 4 DMA controllers to unload the CPU
  • 1x high-speed master direct memory access controller (MDMA) with linked list support
  • 2x dual-port DMAs with FIFO
  • 1x basic DMA with request router capabilities
  • Up to 35 communication peripherals: 4x I2C FM+ interfaces (SMBus/PMBus); 4x USARTs/4x UARTs (ISO7816 interface, LIN, IrDA, up to 12.5 Mbit/s) and 1x LPUART; 6x SPIs, 3 with muxed duplex I2S audio class accuracy via internal audio PLL or external clock, 1x 125 in LP domain (up to 150 MHz); 4x SAIs (serial audio interface); SPDIFRX interface; SWPMI single-wire protocol master I/F; MDIO Slave interface; 2x SD/SDIO/MMC interfaces (up to 125 MHz); 2x CAN controllers: 2 with CAN FD, 1 with time-triggered CAN (TT-CAN); 2x USB OTG interfaces (1FS, 1HS/FS) crystalless solution with LPM and BCD; Ethernet MAC interface with DMA controller; HDMI-CEC; 8- to 14-bit camera interface (up to 80 MHz)
  • 11 analog peripherals: 3x ADCs with 16-bit max. resolution (up to 36 channels, up to 3.6 MSPS); 1x temperature sensor; 2x 12-bit D/A converters (1 MHz); 2x ultra-low-power comparators; 2x operational amplifiers (7.3 MHz bandwidth); 1x digital filters for sigma delta modulator (DFSDM) with 8 channels/4 filters
  • LCD-TFT controller up to XGA resolution
  • Chrom-ART graphical hardware Accelerator (DMA2D) to reduce CPU load
  • Hardware JPEG Codec
  • Up to 22 timers and watchdogs: 1x high-resolution timer (2.1 ns max resolution); 2x32-bit timers with up to 4 IC/OC/PWM or pulse counter and quadrature (incremental) encoder input (up to 240 MHz); 2x 16-bit advanced motor control timers (up to 240 MHz); 10x 16-bit general-purpose timers (up to 240 MHz); 5x 16-bit low-power timers (up to 240 MHz); 2x watchdogs (independent and window); 1x SysTick timer; RTC with sub-second accuracy and hardware calendar
  • SWD & JTAG interfaces
  • 4-Kbyte Embedded Trace Buffer
  • True random number generators (3 oscillators each)
  • 96-bit unique ID
  • All packages are ECOPACK2 compliant

Datasheet

📄 Open Download

Alternative Parts

Common STM32H743VIH6 alternatives overseas buyers search for:

Compliance & Export Codes

TypeDetails
RoHSROHS3
ECCN3A991A2
TypeDetails
CNHTS8542319090

Sourcing Information

Looking for a reliable source for STM32H743VIH6 from STMicroelectronics? SZ Procure is a China electronics sourcing partner, helping international buyers source components through our supplier network in Shenzhen.

For STM32H743VIH6, we can check current supplier availability, compare quotations from multiple sources, coordinate purchasing, and arrange pre-shipment inspection and shipment consolidation according to your requirements.

Need STM32H743VIH6? Send us your required quantity and specifications for a sourcing check and quotation.