STM32G0B1CBT6
Microcontrollers
Manufacturer
MPN
STM32G0B1CBT6
Product Type
Core Processor
ARM Cortex-M0+
Maximum Clock Speed
64 MHz
Package / Case
LQFP-48
Datasheet
Key Attributes
6x USART, timers, ADC, DAC, comm. I/Fs
Technical Specifications
| Type | Description |
|---|---|
| Core Processor | ARM Cortex-M0+ |
| Core Bits | 32 |
| Maximum Clock Speed | 64 MHz |
| Flash Memory | 128 KB |
| Number of I/O | 44 |
| Flash Type | FLASH |
| Type | Description |
|---|---|
| Oscillator Type | Built-in+External |
| Eeprom Bytes | - |
| Operating Temp | -40°C ~ +85°C |
| Working Voltage V | 2.65 V |
| Package / Case | LQFP-48 |
Product Introduction
ARM Cortex-M0+ 32 Bit 64MHz LQFP-48(7x7) Microcontrollers RoHS
Features
- Core: Arm 32-bit Cortex-M0+ CPU, frequency up to 64 MHz
- 40°C to 85°C/105°C/125°C operating temperature
- Memories – Up to 512 Kbytes of Flash memory with protection and securable area, two banks, read-while-write support 144 Kbytes of SRAM (128 Kbytes with HW parity check)
- CRC calculation unit
- Reset and power management – Voltage range: 1.7 V to 3.6 V – Separate I/O supply pin (1.6 V to 3.6 V) Power-on/Power-down reset (POR/PDR) Programmable Brownout reset (BOR) Programmable voltage detector (PVD) Low-power modes: Sleep, Stop, Standby, Shutdown – VBAT supply for RTC and backup registers
- Clock management – 4 to 48 MHz crystal oscillator 32 kHz crystal oscillator with calibration – Internal 16 MHz RC with PLL option (±1 %) – Internal 32 kHz RC oscillator (±5‰)
- Up to 94 fast I/Os – All mappable on external interrupt vectors – Multiple 5 V-tolerant I/Os
- 12-channel DMA controller with flexible mapping
- 12-bit, 0.4 µs ADC (up to 16 ext. channels) – Up to 16-bit with hardware oversampling – Conversion range: 0 to 3.6V
- Two 12-bit DACs, low-power sample-and-hold
- Three fast low-power analog comparators, with programmable input and output, rail-to-rail
- 15 timers (two 128 MHz capable): 16-bit for advanced motor control, one 32-bit and six 16-bit general-purpose, two basic 16-bit, two lowpower 16-bit, two watchdogs, SysTick timer
- Calendar RTC with alarm and periodic wakeup from Stop/Standby/Shutdown
- Communication interfaces: Three I²C-bus interfaces supporting Fastmode Plus (1 Mbit/s) with extra current sink, two supporting SMBus/PMBus and wakeup from Stop mode Six USARTs with master/slave synchronous SPI; three supporting ISO7816 interface, LIN, IrDA capability, auto baud rate detection and wakeup feature Two low-power UARTs Three SPIs (32 Mbit/s) with 4- to 16-bit programmable bitframe, two multiplexed with I²S interface HDMI CEC interface, wakeup on header USB 2.0 FS device (crystal-less) and host controller
- USB Type-C Power Delivery controller
- Two FDCAN controllers
- Development support: serial wire debug (SWD)
- 96-bit unique ID
- All packages ECOPACK 2 compliant
Datasheet
Alternative Parts
Common STM32G0B1CBT6 alternatives overseas buyers search for:
Compliance & Export Codes
| Type | Details |
|---|---|
| RoHS | ROHS3 |
| ECCN | 3A991A2 |
| Type | Details |
|---|---|
| CNHTS | 8542319090 |
Sourcing Information
Looking for a reliable source for STM32G0B1CBT6 from STMicroelectronics? SZ Procure is a China electronics sourcing partner, helping international buyers source components through our supplier network in Shenzhen.
For STM32G0B1CBT6, we can check current supplier availability, compare quotations from multiple sources, coordinate purchasing, and arrange pre-shipment inspection and shipment consolidation according to your requirements.
Need STM32G0B1CBT6? Send us your required quantity and specifications for a sourcing check and quotation.