STM32G0B0KET6
Microcontrollers (MCU/MPU)
Technical Specifications
| Type | Description |
|---|---|
| Core Processor | ARM Cortex-M0+ |
| Core Size | 32 bit |
| Maximum Clock Speed | 64 MHz |
| Program Storage Size | 512 KB |
| Number of I/O | 29 |
| Flash Type | FLASH |
| Type | Description |
|---|---|
| Oscillator Type | Built-in+External |
| EEPROM | - |
| Operating Temperature | -40°C~+85°C |
| Supply Voltage | 2V~3.6V |
| Package / Case | LQFP-32(7x7) |
Product Introduction
32-bit microcontroller based on Arm Cortex-M0+ core, featuring 512KB flash, 144KB RAM, 6 USARTs, multiple timers, ADC, communication interfaces, with an operating voltage range of 2.0V to 3.6V.
Features
- Core: Arm 32-bit Cortex-M0+ CPU, frequency up to 64 MHz
- 40°C to 85°C operating temperature
- Memories: 512 Kbytes of Flash memory with protection, two banks, read-while-write support; 144 Kbytes of SRAM (128 Kbytes with HW parity check)
- CRC calculation unit
- Reset and power management: Voltage range: 2.0 V to 3.6 V; Power-on/Power-down reset (POR/PDR)
- Low-power modes: Sleep, Stop, Standby
- VBAT supply for RTC and backup registers
- Clock management: 4 to 48 MHz crystal oscillator; 32 kHz crystal oscillator with calibration; Internal 16 MHz RC with PLL option (±5 %); Internal 32 kHz RC oscillator (±5 %)
- Up to 93 fast I/Os, all mappable on external interrupt vectors; Multiple 5 V-tolerant I/Os
- 12-channel DMA controller with flexible mapping
- 12-bit, 0.4 μs ADC (up to 16 ext. channels); Up to 16-bit with hardware oversampling; Conversion range: 0 to 3.6V
- 12 timers: 16-bit for advanced motor control, six 16-bit general-purpose, two basic 16-bit, two watchdogs, SysTick timer
- Calendar RTC with alarm and periodic wakeup from Stop/Standby
- Communication interfaces: Three I²C-bus interfaces supporting Fastmode Plus (1 Mbit/s) with extra current sink, two supporting SMBus/PMBus and wakeup from Stop mode; Six USARTs with master/slave synchronous SPI; three supporting ISO7816 interface, LIN, IrDA capability, auto baud rate detection and wakeup feature; Three SPIs (32 Mbit/s) with 4- to 16-bit programmable bitframe, two multiplexed with I²S interface
- USB 2.0 FS device and host controller
- Development support: serial wire debug (SWD)
- All packages ECOPACK 2 compliant
Datasheet
Alternative Parts
Common STM32G0B0KET6 alternatives overseas buyers search for:
Compliance & Export Codes
| Type | Details |
|---|---|
| RoHS | ROHS3 |
| ECCN | 3A991A2 |
| Type | Details |
|---|---|
| CNHTS | 8542319090 |
Sourcing Information
Sourcing STM32G0B0KET6 from China? SZ Procure helps international buyers navigate the Shenzhen electronics market and locate suitable supplier options for specific component requirements.
When you need STM32G0B0KET6, SZ Procure can look into supplier options, confirm current availability, compare sourcing quotes and handle purchasing, pre-shipment inspection and consolidated shipment from Shenzhen.
Looking to source STM32G0B0KET6? Submit an RFQ and let our Shenzhen sourcing team check available supplier options for you.