STM32F767BIT6

Technical Specifications

Product Introduction

Features

• Core: ARM 32-bit Cortex-M7 CPU with DPFPU, ART AcceleratorM and L1-cache: 16 Kbytes I/D cache, allowing 0-wait state execution from embedded Flash and external memories, up to 216 MHz, MPU, 462 DMIPS/2.14 DMIPS/MHz (Dhrystone 2.1), and DsP instructions.
• Up to 2 Mbytes of Flash memory organized into two banks allowing read-while-write
• SRAM: 512 Kbytes (including 128 Kbytes of data TCM RAM for critical real-time data) + 16 Kbytes of instruction TCM RAM (for critical real-time routines) + 4 Kbytes of backup SRAM
• Flexible external memory controller with up to 32-bit data bus: SRAM, PSRAM, SDRAM/LPSDRSDRAM, NOR/NAND memories
• Dual mode Quad-SPI
• Graphics Chrom-ART Accelerator (DMA2D), graphical hardware accelerator enabling enhanced graphical user interface
• Hardware JPEG codec
• LCD-TFT controller supporting up to XGA resolution
• MIPI DSI host controller supporting up to 720p 30 Hz resolution
• 1.7 V to 3.6 V application supply and I/Os
• POR, PDR, PVD and BOR
• Dedicated USB power
• 4-to-26 MHz crystal oscillator
• Internal 16 MHz factory-trimmed RC (1% accuracy)
• 32 kHz oscillator for RTC with calibration
• Internal 32 kHz RC with calibration
• Sleep, Stop and Standby modes
• V(BAT) supply for RTC, 32x32 bit backup registers + 4 Kbytes backup SRAM
• 3x12-bit, 2.4 MSPS ADC: up to 24 channels
• Digital filters for sigma delta modulator (DFSDM), 8 channels / 4 filters
• 2x12-bit D/A converters
• General-purpose DMA: 16-stream DMA controller with FIFOs and burst support
• Up to 18 timers: up to thirteen 16-bit (1x low power 16-bit timer available in Stop mode) and two 32-bit timers, each with up to 4 IC/Oc/PwM or pulse counter and quadrature (incremental) encoder input. All 15 timers running up to 216 MHz.
• 2x watchdogs, SysTick timer
• SWD & JTAG interfaces
• Cortex-M7 Trace Macrocell
• Up to 168 I/O ports with interrupt capability
• Up to 164 fast I/Os up to 108 MHz
• Up to 166 5 V-tolerant I/Os
• Up to 28 communication interfaces
• Up to 4 I²C interfaces (SMBus/PMBus)
• Up to 4 USARTs/4 UARTs (12.5 Mbit/s, ISO7816 interface, LIN, IrDA, modem control)
• Up to 6 SPIs (up to 54 Mbit/s), 3 with muxed simplex I²S for audio
• 2x SAls (serial audio interface)
• 3x CANs (2.0B Active) and 2x SDMMCs
• SPDIFRX interface
• HDMI-CEC
• MDIO slave interface
• USB 2.0 full-speed device/host/OTG controller with on-chip PHY
• USB 2.0 high-speed/full-speed device/host/OTG controller with dedicated DMA, on-chip full-speed PHY and ULPI
• 10/100 Ethernet MAC with dedicated DMA: supports IEEE 1588v2 hardware, MII/RMII
• 8- to 14-bit camera interface up to 54 Mbyte/s
• True random number generator
• CRC calculation unit
• RTC: subsecond accuracy, hardware calendar
• 96-bit unique ID

Datasheet

Alternative Parts

Common STM32F767BIT6 alternatives overseas buyers search for:

• STM32F779BIT6 (request quote)
• STM32F777BIT6 (request quote)
• STM32F769BIT6 (request quote)

Compliance & Export Codes