STM32F446VET6TR
Microcontrollers (MCU/MPU)
Manufacturer
MPN
STM32F446VET6TR
Product Type
Core Processor
ARM Cortex-M4
Maximum Clock Speed
180 MHz
Package / Case
LQFP-100(14x14)
Datasheet
Key Attributes
Arm Cortex-M4 32-bit MCU+FPU, USB OTG HS/FS, TIMs, ADCs and communication interfaces
Technical Specifications
| Type | Description |
|---|---|
| Core Processor | ARM Cortex-M4 |
| Core Size | 32 bit |
| Maximum Clock Speed | 180 MHz |
| Program Storage Size | 512 KB |
| Number of I/O | 81 |
| Flash Type | FLASH |
| ADC (Bit) | 12 bit |
| Type | Description |
|---|---|
| Oscillator Type | Built-in |
| EEPROM | - |
| DAC (Bit) | 12 bit |
| Operating Temperature | -40°C~+85°C |
| Supply Voltage | 1.7V~3.6V |
| Package / Case | LQFP-100(14x14) |
Product Introduction
Arm® Cortex®-M4 32-bit MCU+FPU, 225 DMIPS, up to 512 KB Flash/128+4 KB RAM, USB OTG HS/FS, 17 timers, 3 ADCs and 20 communication interfaces
Features
- Core: Arm 32-bit Cortex-M4 CPU with FPU, Adaptive real-time accelerator (ART Accelerator) allowing 0-wait state execution from Flash memory, frequency up to 180 MHz, MPU, 225 DMIPS/1.25 DMIPS/MHz (Dhrystone 2.1), and DSP instructions
- Memories – 512 Kbytes of Flash memory – 128 Kbytes of SRAM – Flexible external memory controller with up to 16-bit data bus: SRAM, PSRAM, SDRAM/LPSDR SDRAM, NOR/NAND Flash memories – Dual mode QuadSPI interface
- LCD parallel interface, 8080/6800 modes
- Clock, reset and supply management – 1.7 V to 3.6 V application supply and I/Os – POR, PDR, PVD and BOR – 4 to 26 MHz crystal oscillator – Internal 16 MHz factory-trimmed RC (1% accuracy) – 32 kHz oscillator for RTC with calibration – Internal 32 kHz RC with calibration
- Low power – Sleep, Stop and Standby modes
- VBAT supply for RTC, 20x32 bit backup registers plus optional 4 KB backup SRAM
- 3x 12-bit, 2.4 MSPS ADC: up to 24 channels and 7.2 MSPS in triple interleaved mode
- 2x 12-bit D/A converters
- General-purpose DMA: 16-stream DMA controller with FIFOs and burst support
- Up to 17 timers: 2x watchdog, 1x SysTick timer and up to twelve 16-bit and two 32-bit timers up to 180 MHz, each with up to four IC/OC/PWM or pulse counter
- Debug mode – SWD and JTAG interfaces – Cortex-M4 Trace Macrocell
- Up to 114 I/O ports with interrupt capability – Up to 111 fast I/Os up to 90 MHz – Up to 112 5V-tolerant I/Os
- Up to 20 communication interfaces – SPDIF-Rx Up to 4x I²C interfaces (SMBus/PMBus) Up to four USARTs and two UARTs (11.25 Mbit/s, ISO7816 interface, LIN, IrDA, modem control) Up to four SPIs (45 Mbits/s), three with muxed I²S for audio class accuracy via internal audio PLL or external clock
- 2x SAI (serial audio interface)
- 2x CAN (2.0B Active)
- SDIO interface
- Consumer electronics control (CEC) I/F
- Advanced connectivity – USB 2.0 full-speed device/host/OTG controller with on-chip PHY USB 2.0 high-speed/full-speed device/host/OTG controller with dedicated DMA, on-chip full-speed PHY and ULPI Dedicated USB power rail enabling on-chip PHYs operation throughout the entire MCU power supply range
- 8- to 14-bit parallel camera interface up to 54 Mbytes/s
- CRC calculation unit
- RTC: subsecond accuracy, hardware calendar
- 96-bit unique ID
Datasheet
Alternative Parts
Common STM32F446VET6TR alternatives overseas buyers search for:
Compliance & Export Codes
| Type | Details |
|---|---|
| RoHS | ROHS3 |
| ECCN | 3A991A2 |
| Type | Details |
|---|---|
| CNHTS | 8542319090 |
Sourcing Information
Sourcing STM32F446VET6TR from China? SZ Procure helps international buyers navigate the Shenzhen electronics market and locate suitable supplier options for specific component requirements.
For STM32F446VET6TR, we can check current supplier availability, compare quotations from multiple sources, coordinate purchasing, and arrange pre-shipment inspection and shipment consolidation according to your requirements.
Need STM32F446VET6TR? Send us your required quantity and specifications for a sourcing check and quotation.