STM32F446RCT6
Microcontrollers
Technical Specifications
| Type | Description |
|---|---|
| Core Processor | ARM Cortex-M4 |
| Core Bits | 32 |
| Maximum Clock Speed | 180 MHz |
| Flash Memory | 256 KB |
| Number of I/O | 50 |
| Flash Type | FLASH |
| Adc Bits | 12.0 |
| Type | Description |
|---|---|
| Oscillator Type | Built-in |
| Eeprom Bytes | - |
| DAC (Bit) | 12bit |
| Operating Temp | -40°C ~ +85°C |
| Working Voltage V | 2.65 V |
| Package / Case | LQFP-64 |
Product Introduction
Arm® Cortex®-M4 32-bit MCU+FPU, 225 DMIPS, up to 512 KB Flash/128+4 KB RAM, USB OTG HS/FS, 17 timers, 3 ADCs and 20 communication interfaces
Features
- Core: Arm 32-bit Cortex-M4 CPU with FPU, Adaptive real-time accelerator (ART Accelerator) allowing 0-wait state execution from Flash memory, frequency up to 180 MHz, MPU, 225 DMIPS/1.25 DMIPS/MHz (Dhrystone 2.1), and DSP instructions
- Memories: 512 Kbytes of Flash memory, 128 Kbytes of SRAM, Flexible external memory controller with up to 16-bit data bus: SRAM, PSRAM, SDRAM/LPSDR SDRAM, NOR/NAND Flash memories, Dual mode QuadSPI interface
- LCD parallel interface, 8080/6800 modes
- Clock, reset and supply management: 1.7 V to 3.6 V application supply and I/Os, POR, PDR, PVD and BOR, 4 to 26 MHz crystal oscillator, Internal 16 MHz factory-trimmed RC (1% accuracy), 32 kHz oscillator for RTC with calibration, Internal 32 kHz RC with calibration
- Low power: Sleep, Stop and Standby modes
- VBAT supply for RTC, 20x32 bit backup registers plus optional 4 KB backup SRAM
- 3x 12-bit, 2.4 MSPS ADC: up to 24 channels and 7.2 MSPS in triple interleaved mode
- 2x 12-bit D/A converters
- General-purpose DMA: 16-stream DMA controller with FIFOs and burst support
- Up to 17 timers: 2x watchdog, 1x SysTick timer and up to twelve 16-bit and two 32-bit timers up to 180 MHz, each with up to four IC/OC/PWM or pulse counter
- Debug mode: SWD and JTAG interfaces, Cortex-M4 Trace Macrocell
- Up to 114 I/O ports with interrupt capability
- Up to 111 fast I/Os up to 90 MHz
- Up to 112 5V-tolerant I/Os
- Up to 20 communication interfaces: SPDIF-Rx, Up to 4x I²C interfaces (SMBus/PMBus), Up to four USARTs and two UARTs (11.25 Mbit/s, ISO7816 interface, LIN, IrDA, modem control), Up to four SPIs (45 Mbits/s), three with muxed I²S for audio class accuracy via internal audio PLL or external clock, 2x SAI (serial audio interface), 2x CAN (2.0B Active), SDIO interface, Consumer electronics control (CEC) I/F
- Advanced connectivity: USB 2.0 full-speed device/host/OTG controller with on-chip PHY, USB 2.0 high-speed/full-speed device/host/OTG controller with dedicated DMA, on-chip full-speed PHY and ULPI, Dedicated USB power rail enabling on-chip PHYs operation throughout the entire MCU power supply range
- 8- to 14-bit parallel camera interface up to 54 Mbytes/s
- CRC calculation unit
- RTC: subsecond accuracy, hardware calendar
- 96-bit unique ID
Datasheet
Alternative Parts
Common STM32F446RCT6 alternatives overseas buyers search for:
Compliance & Export Codes
| Type | Details |
|---|---|
| RoHS | ROHS3 |
| ECCN | 3A991A2 |
| Type | Details |
|---|---|
| CNHTS | 8542319090 |
Sourcing Information
Need STM32F446RCT6 from STMicroelectronics for your next order? SZ Procure provides local sourcing support in Shenzhen — we help buyers check supplier availability, compare quotations, and coordinate procurement for China-sourced components.
Our Shenzhen sourcing team can help with supplier sourcing, availability checks and quotation comparison for STM32F446RCT6, then coordinate procurement, supplier screening, inspection and international shipping based on what you need.
Looking to source STM32F446RCT6? Submit an RFQ and let our Shenzhen sourcing team check available supplier options for you.