STM32F429IGT6

Technical Specifications

Product Introduction

Features

• Core: ARM 32-bit Cortex-M4 CPU with FPU, Adaptive real-time accelerator (ART Accelerator) allowing O-wait state execution from Flash memory, frequency up to 180 MHz, MPU, 225 DMIPS/1.25 DMIPS/MHz (Dhrystone 2.1), and DSP instructions
• Memories - Up to 2 MB of Flash memory organized into two banks allowing read-while-write - Up to 256+4 KB of SRAM including 64-KB of CCM (core coupled memory) data RAM - Flexible external memory controller with up to 32-bit data bus: SRAM, PSRAM, SDRAM, Compact Flash/NOR/NAND memories
• LCD parallel interface, 8080/6800 modes
• LCD-TFT controller up to VGA resolution with dedicated Chrom-ART Accelerator for enhanced graphic content creation (DMA2D)
• Clock, reset and supply management - 1.8 V to 3.6 V application supply and I/Os - POR, PDR, PVD and BOR - 4-to-26 MHz crystal oscillator - Internal 16 MHz factory-trimmed RC (1% accuracy) 32 kHz oscillator for RTC with calibration - Internal 32 kHz RC with calibration
• Low power - Sleep, Stop and Standby modes VBAT supply for RTC, 20x32 bit backup registers + optional 4 KB backup SRAM
• 3x12-bit, 2.4 MSPS ADC: up to 24 channels and 7.2 MSPS in triple interleaved mode 2x12-bit D/A converters
• General-purpose DMA: 16-stream DMA controller with FIFOs and burst support
• Up to 17 timers: up to twelve 16-bit and two 32-bit timers up to 180 MHz, each with up to 4 IC/OC/PWM or pulse counter and quadrature (incremental) encoder input
• Debug mode - SWD & JTAG interfaces
• Cortex-M4 Embedded Trace Macrocell ITM
• Up to 168 I/O ports with interrupt capability
• Up to 164 fast I/Os up to 84 MHz
• Up to 166 5 V-tolerant I/Os
• Up to 21 communication interfaces
• Up to 3xI²C interfaces (SMBus/PMBus)
• Up to 4 USARTs/4 UARTs (11.25 Mbit/s, ISO7816 interface, LIN, IrDA, modem control)
• Up to 6 SPIs (42 Mbits/s), 2 with muxed full-duplex I²S for audio class accuracy via internal audio PLL or external clock
• 1 x SAI (serial audio interface)
• 2xCAN (2.0B Active) and SDIO interface
• Advanced connectivity USB 2.0 full-speed device/host/OTG controller with on-chip PHY
• USB 2.0 high-speed/full-speed device/host/OTG controller with dedicated DMA, on-chip full-speed PHY and ULPI
• 10/100 Ethernet MAC with dedicated DMA: supports IEEE 1588v2 hardware, MII/RMII
• 8- to 14-bit parallel camera interface up to 54 MB/s
• True random number generator
• CRC calculation unit
• 96-bit unique ID
• RTC: subsecond accuracy, hardware calendar

Applications

• - Embedded devices with display and camera - Network-connected devices (Ethernet, USB OTG) - Industrial control systems - Consumer electronics (smart home, multimedia devices) - Medical instruments - IoT terminal devices

Datasheet

Alternative Parts

Common STM32F429IGT6 alternatives overseas buyers search for:

• STM32F437IGT6 (request quote)
• STM32F427IGT6 (request quote)
• STM32F429IIT6 (request quote)
• STM32F439IIT6 (request quote)
• STM32F407IGT6 (request quote)
• STM32F407IGT7 (request quote)
• STM32F439IGT6 (request quote)
• STM32F427IIT6 (request quote)
• STM32F437IIT7 (request quote)
• STM32F437IIT6 (request quote)
• STM32F429IIT6G (request quote)
• STM32F429IIT6E (request quote)
• STM32F439IIT6V (request quote)
• STM32F429IIT6J (request quote)
• STM32F427IIT7 (request quote)
• STM32F417IGT7 (request quote)

Compliance & Export Codes