STMicroelectronics

STM32F103VET6

Microcontrollers

Manufacturer
STMicroelectronics
MPN
STM32F103VET6
Product Type
Microcontrollers
Core Processor
ARM Cortex-M3
Maximum Clock Speed
72 MHz
Package / Case
LQFP-100
Datasheet
STM32F103VET6 Datasheet
Key Attributes
High-density performance line Arm-based 32-bit MCU with 256 to 512KB Flash, USB, CAN, 11 timers, 3 ADCs, 13 communication interfaces

Technical Specifications

TypeDescription
Core ProcessorARM Cortex-M3
Core Bits32
Maximum Clock Speed72 MHz
Flash Memory512 KB
Number of I/O80
Flash TypeFLASH
Adc Bits12.0
TypeDescription
Oscillator TypeBuilt-in
Eeprom Bytes-
DAC (Bit)12bit
Operating Temp-40°C ~ +85°C
Working Voltage V2.8 V
Package / CaseLQFP-100

Product Introduction

This is an ARM-based 32-bit MCU from the high-density performance series, featuring 256 to 512KB flash memory, USB, CAN, 11 timers, 3 ADCs, and 13 communication interfaces.

Features

  • Core: ARM 32-bit Cortex-M3 CPU - 72 MHz maximum frequency, 1.25 DMIPS/MHz (Dhrystone 2.1) performance at 0 wait state memory access Single-cycle multiplication and hardware division
  • Memories - 256 to 512 Kbytes of Flash memory - up to 64 Kbytes of SRAM - Flexible static memory controller with 4 Chip Select. Supports Compact Flash, SRAM, PSRAM, NOR and NAND memories - LCD parallel interface, 8080/6800 modes
  • Clock, reset and supply management 2.0 to 3.6 V application supply and I/Os - POR, PDR, and programmable voltage detector (PVD) - 4-to-16 MHz crystal oscillator - Internal 8 MHz factory-trimmed RC - Internal 40 kHz RC with calibration 32 kHz oscillator for RTC with calibration
  • Low power Sleep, Stop and Standby modes VBAT supply for RTC and backup registers 3×12-bit, 1 μs A/D converters (up to 21 channels) - Conversion range: 0 to 3.6 V - Triple-sample and hold capability - Temperature sensor 2×12-bit D/A converters
  • DMA: 12-channel DMA controller - Supported peripherals: timers, ADCs, DAC, SDIO, IISs, SPIs, I²Cs and USARTs
  • Debug mode - Serial wire debug (SWD) & JTAG interfaces Cortex-M3 Embedded Trace Macrocel ITM
  • Up to 112 fast I/O ports 51/80/112 I/Os, all mappable on 16 external interrupt vectors and almost all 5 V-tolerant
  • Up to 11 timers: Up to four 16-bit timers, each with up to 4 IC/OC/PWM or pulse counter and quadrature (incremental) encoder input 2×16-bit motor control PWM timers with deadtime generation and emergency stop 2× watchdog timers (Independent and Window) SysTick timer: a 24-bit downcounter 2×16-bit basic timers to drive the DAC
  • Up to 2×I²C interfaces (SMBus/PMBus)
  • Up to 5 USARTs (ISO 7816 interface, LIN, IrDA capability, modem control)
  • Up to 3 SPIs (18 Mbit/s), 2 with IIS interface multiplexed
  • CAN interface (2.0B Active)
  • USB 2.0 full speed interface
  • SDIO interface
  • CRC calculation unit, 96-bit unique ID ECOPACK packages

Datasheet

📄 Open Download

Alternative Parts

Common STM32F103VET6 alternatives overseas buyers search for:

Compliance & Export Codes

TypeDetails
RoHSROHS3
ECCN3A991A2
TypeDetails
CNHTS8542319090

Sourcing Information

Sourcing STM32F103VET6 from China? SZ Procure helps international buyers navigate the Shenzhen electronics market and locate suitable supplier options for specific component requirements.

When you need STM32F103VET6, SZ Procure can look into supplier options, confirm current availability, compare sourcing quotes and handle purchasing, pre-shipment inspection and consolidated shipment from Shenzhen.

Ready to source STM32F103VET6? Send your requirement through Request a Quote and we'll help check sourcing options and procurement costs.