STMicroelectronics

STM32F103RCT6

Microcontrollers

Manufacturer
MPN
STM32F103RCT6
Product Type
Core Processor
ARM Cortex-M3
Maximum Clock Speed
72 MHz
Package / Case
LQFP-64
Key Attributes
Flash, USB, CAN, 11 timers, 3 ADCs, 13 communication interfaces

Technical Specifications

TypeDescription
Core ProcessorARM Cortex-M3
Core Bits32
Maximum Clock Speed72 MHz
Flash Memory256 KB
Number of I/O51
Flash TypeFLASH
Adc Bits12.0
TypeDescription
Oscillator TypeBuilt-in
Eeprom Bytes-
DAC (Bit)12bit
Operating Temp-40°C ~ +85°C
Working Voltage V2.8 V
Package / CaseLQFP-64

Product Introduction

This is an ARM-based 32-bit MCU from the high-density performance series, featuring 256 to 512KB flash memory, USB, CAN, 11 timers, 3 ADCs, and 13 communication interfaces.

Features

  • Core: ARM 32-bit Cortex-M3 CPU - 72 MHz maximum frequency, 1.25 DMIPS/MHz (Dhrystone 2.1) performance at 0 wait state memory access Single-cycle multiplication and hardware division
  • Memories - 256 to 512 Kbytes of Flash memory - up to 64 Kbytes of SRAM - Flexible static memory controller with 4 Chip Select. Supports Compact Flash, SRAM, PSRAM, NOR and NAND memories - LCD parallel interface, 8080/6800 modes
  • Clock, reset and supply management 2.0 to 3.6 V application supply and I/Os - POR, PDR, and programmable voltage detector (PVD) - 4-to-16 MHz crystal oscillator - Internal 8 MHz factory-trimmed RC - Internal 40 kHz RC with calibration 32 kHz oscillator for RTC with calibration
  • Low power Sleep, Stop and Standby modes VBAT supply for RTC and backup registers 3×12-bit, 1 μs A/D converters (up to 21 channels) - Conversion range: 0 to 3.6 V - Triple-sample and hold capability - Temperature sensor 2×12-bit D/A converters
  • DMA: 12-channel DMA controller - Supported peripherals: timers, ADCs, DAC, SDIO, IISs, SPIs, I²Cs and USARTs
  • Debug mode - Serial wire debug (SWD) & JTAG interfaces Cortex-M3 Embedded Trace Macrocel ITM
  • Up to 112 fast I/O ports 51/80/112 I/Os, all mappable on 16 external interrupt vectors and almost all 5 V-tolerant
  • Up to 11 timers: Up to four 16-bit timers, each with up to 4 IC/OC/PWM or pulse counter and quadrature (incremental) encoder input 2×16-bit motor control PWM timers with deadtime generation and emergency stop 2× watchdog timers (Independent and Window) SysTick timer: a 24-bit downcounter 2×16-bit basic timers to drive the DAC
  • Up to 2×I²C interfaces (SMBus/PMBus)
  • Up to 5 USARTs (ISO 7816 interface, LIN, IrDA capability, modem control)
  • Up to 3 SPIs (18 Mbit/s), 2 with IIS interface multiplexed
  • CAN interface (2.0B Active)
  • USB 2.0 full speed interface
  • SDIO interface
  • CRC calculation unit, 96-bit unique ID ECOPACK packages

Datasheet

📄 Open Download

Alternative Parts

Common STM32F103RCT6 alternatives overseas buyers search for:

Compliance & Export Codes

TypeDetails
RoHSROHS3
ECCN3A991A2
TypeDetails
CNHTS8542319090

Sourcing Information

Need STM32F103RCT6 from STMicroelectronics for your next order? SZ Procure provides local sourcing support in Shenzhen — we help buyers check supplier availability, compare quotations, and coordinate procurement for China-sourced components.

When you need STM32F103RCT6, SZ Procure can look into supplier options, confirm current availability, compare sourcing quotes and handle purchasing, pre-shipment inspection and consolidated shipment from Shenzhen.

Need STM32F103RCT6? Send us your required quantity and specifications for a sourcing check and quotation.