SRD-05VDC-SL-C
Power Relays, Over 2 Amps
Technical Specifications
| Type | Description |
|---|---|
| Length Mm | 19.2 |
| Height Mm | 15.8 |
| Width Mm | 15.6 |
| Coil Voltage | 5V |
| Switching Voltage(Max) | 250V@AC |
| Coil Resistance | 70Ohm |
| Release Time | 10ms |
| Operate Time | 10ms |
| Type | Description |
|---|---|
| Contact Resistance | 100mOhm |
| Number of Pins | 5 |
| Coil Type | Non-Polarized - Single Coil |
| Switching Current(Max) | 15A |
| Coil Rated Power | 360mW |
| Contact Rating | - |
| Contact Form | One set of changeover: 1C (SPDT-changeover) |
| Package / Case | Through Hole,19.2x15.6mm |
Product Introduction
Power Relay 1 Form C: 1C (SPDT-CO) 5V Coil Through Hole,15.6x19.2mm
Datasheet
Compliance & Export Codes
| Type | Details |
|---|---|
| CNHTS | 8536411090 |
| USHTS | 8536410030 |
| TARIC | 8536411090 |
| CAHTS | 8536410099 |
| Type | Details |
|---|---|
| BRHTS | 85364100 |
| INHTS | 85364100 |
| MXHTS | 8536.41.10 |
Frequently Asked Questions
What are the primary mechanical, electrical, and structural specifications of the SRD-05VDC-SL-C relay?
The Songle SRD-05VDC-SL-C is a miniature PCB-mounted electromagnetic relay with a Single Pole Double Throw (SPDT / 1 Form C) contact configuration. It features a sealed plastic enclosure measuring approximately 19.2 × 15.6 × 15.8 mm and uses a 5-pin through-hole mounting footprint. The relay operates from a 5 VDC coil with a rated coil power of 0.36 W and provides 1500 VAC dielectric isolation between the coil and contacts (1 minute), making it suitable for applications requiring electrical isolation between the control and switching circuits.
What electrical characteristics should be considered when using the SRD-05VDC-SL-C?
The SRD-05VDC-SL-C uses a 5 VDC coil with a rated power consumption of 0.36 W, corresponding to a nominal coil current of approximately 71.4 mA and a nominal coil resistance of 70 Ω. According to the datasheet, the pull-in voltage is 75% maximum of the rated voltage, the release voltage is 10% minimum of the rated voltage, and the maximum allowable coil voltage is 130% of the rated voltage. These electrical characteristics should be considered when designing the relay drive circuit.
What are the contact ratings of the SRD-05VDC-SL-C relay?
The SRD series is available with 7 A, 10 A, and 15 A contact ratings depending on the model. The datasheet specifies switching ratings of 10 A at 250 VAC and 15 A at 250 VAC (NO contact) for applicable versions. The relay has a maximum switching voltage of 250 VAC, a maximum switching current of 15 A, and a maximum switching capacity of 3750 VA. Contact material options include AgCdO, AgSnO₂, and AgNi, depending on the product variant.
Sourcing Information
Sourcing SRD-05VDC-SL-C from China? SZ Procure helps international buyers navigate the Shenzhen electronics market and locate suitable supplier options for specific component requirements.
For SRD-05VDC-SL-C, we can check current supplier availability, compare quotations from multiple sources, coordinate purchasing, and arrange pre-shipment inspection and shipment consolidation according to your requirements.
Ready to source SRD-05VDC-SL-C? Send your requirement through Request a Quote and we'll help check sourcing options and procurement costs.