SN75LBC182DR
Interface ICs
Technical Specifications
| Type | Description |
|---|---|
| Data Rate | 250 kbps |
| Quiescent Current | 250 µA |
| Nodes | 128 |
| ESD Protect | ±15kV |
| Communication Mode | Half-Duplex |
| Number of Drivers | 1 |
| Type | Description |
|---|---|
| Number of Receivers | 1 |
| Supply Voltage | 4.75V~5.25V |
| Type | Transceiver |
| Operating Temperature | 0°C~+70°C |
| Features | Tx/Rx enable;Enable shutdown;Thermal shutdown protection |
| Package / Case | SOIC-8 |
Product Introduction
The SN65LBC182 and SN75LBC182 are differential data line transceivers with a high level of ESD protection in the trade-standard footprint of the SN75176. They are designed for balanced transmission lines and meet ANSI standard TIA/EIA-485-A and ISO 8482. The SN65LBC182 and SN75LBC182 combine a 3-state, differential line driver and differential input line receiver, both of which operate from a single 5-V power supply. The driver and receiver have active-high and active-low enables, respectively, which can be externally connected together to function as a direction control.
The driver outputs and the receiver inputs connect internally to form a differential input/output (I/O) bus port that is designed to offer minimum loading to the bus. This port operates over a wide range of common-mode voltage, making the device suitable for party-line applications. The device also includes additional features for party-line data buses in electrically noisy environment applications such as industrial process control or power inverters.
The SN75LBC182 and SN75LBC182 bus pins also exhibit a high input resistance equivalent to one-fourth unit load allowing connection of up to 128 similar devices on the bus. The high ESD tolerance protects the device for cabled connections.
The differential driver design incorporates slew-rate-controlled outputs sufficient to transmit data up to 250 kbps. Slew-rate control allows longer unterminated cable runs and longer stub lengths from the main backbone than possible with uncontrolled voltage transitions. The receiver design provides a fail-safe output of a high level when the inputs are left floating (open circuit). Very low device supply current can be achieved by disabling the driver and the receiver.
The SN65LBC182 is characterized for operation from -40℃ to 85℃ and the SN75LBC182 is characterized for operation from 0℃ to 70℃
Features
- One-Fourth Unit Load Allows up to 128 Devices on a Bus
- ESD Protection for Bus Terminals:
- ±15-kV Human Body Model
- ±8-kV IEC61000-4-2, Contact Discharge
- ±15-kV IEC61000-4-2, Air-Gap Discharge
- Meets or Exceeds the Requirements of ANSI Standard TIA/EIA-485-A and ISO 8482:1987(E)
- Controlled Driver Output
- Voltage Slew Rates Allow Longer Cable Stub Lengths
- Designed for Signaling Rates Up to 250-kbps
- Low Disabled Supply Current... 250 μA Max
- Thermal Shutdown Protection
- Open-Circuit Rail
- Safe Receiver Design
- Receiver Input Hysteresis... 70 mV Typ
- Glitch-Free Power-Up and Power-Down Protection
Applications
- Utility Meters
- Industrial Process Control
- Building Automation
Datasheet
Alternative Parts
Common SN75LBC182DR alternatives overseas buyers search for:
Compliance & Export Codes
| Type | Details |
|---|---|
| RoHS | ROHS3 |
| ECCN | EAR99 |
| CNHTS | 8542399000 |
| USHTS | 8542390001 |
| TARIC | 8542399000 |
| Type | Details |
|---|---|
| CAHTS | 8542390000 |
| BRHTS | 85423999 |
| INHTS | 85423900 |
| MXHTS | 8542.39.99 |
Sourcing Information
Sourcing SN75LBC182DR from China? SZ Procure helps international buyers navigate the Shenzhen electronics market and locate suitable supplier options for specific component requirements.
For SN75LBC182DR, we can check current supplier availability, compare quotations from multiple sources, coordinate purchasing, and arrange pre-shipment inspection and shipment consolidation according to your requirements.
Need SN75LBC182DR? Send us your required quantity and specifications for a sourcing check and quotation.