SN65HVD1781DR
Interface ICs
Technical Specifications
| Type | Description |
|---|---|
| Data Rate | 1 Mbps |
| Quiescent Current | 6 mA |
| Nodes | 320 |
| ESD Protect | ±16kV |
| Communication Mode | Half-Duplex |
| Number of Drivers | 1 |
| Type | Description |
|---|---|
| Number of Receivers | 1 |
| Type | Transceiver |
| Supply Voltage | 3.15V~5.5V |
| Operating Temperature | -40°C~+125°C |
| Features | Tx/Rx enable;Enable shutdown;Fail-safe;Hot-swap protection;Low-power mode |
| Package / Case | SOIC-8 |
Product Introduction
The SN65HVD178x devices are designed to survive overvoltage faults such as direct shorts to power supplies, mis- wiring faults, connector failures, cable crushes, and tool mis- applications. The devices are also robust to ESD events with high levels of protection to the human- body- model specification.
The SN65HVD178x devices combine a differential driver and a differential receiver, which operate from a single power supply. In the SN65HVD1782, the driver differential outputs and the receiver differential inputs are connected internally to form a bus port suitable for half- duplex (two- wire bus) communication. This port features a wide common- mode voltage range, making the devices suitable for multipoint applications over long cable runs. These devices are characterized from - 40℃ to 125℃. These devices are pin- compatible with the industry- standard SN75176 transceiver, making them drop- in upgrades in most systems.
These devices are fully compliant with ANSI TIA/EIA 485- A with a 5- V supply and can operate with a 3.3- V supply with reduced driver output voltage for low- power applications. For applications where operation is required over an extended common- mode voltage range, see the SN65HVD1785 (SLLS872) data sheet.
Features
- Bus- Pin Fault Protection to: > ±70 V (SN65HVD1780, SN65HVD1781); > ±30 V (SN65HVD1782)
- Operation With 3.3- V to 5- V Supply Range
- ±16- kV HBM Protection on Bus Pins
- Reduced Unit Load for Up to 320 Nodes
- Failsafe Receiver for Open- Circuit, Short- Circuit, and Idle- Bus Conditions
- Low Power Consumption
- Low Standby Supply Current, 1 μA Maximum
- Icc 4- mA Quiescent Current During Operation
- Pin- Compatible With Industry- Standard SN75176
- Signaling Rates of 115 kbps, 1 Mbps, and up to 10 Mbps
- Create a Custom Design using the SN65HVD178x with the WEBENCH Power Designer
Applications
- HVAC Networks
- Security Electronics
- Building Automation
- Telecommunication Equipment
- Motion Control
- Industrial Networks
Datasheet
Alternative Parts
Common SN65HVD1781DR alternatives overseas buyers search for:
Compliance & Export Codes
| Type | Details |
|---|---|
| RoHS | ROHS3 |
| ECCN | EAR99 |
| CNHTS | 8542399000 |
| USHTS | 8542390001 |
| TARIC | 8542399000 |
| Type | Details |
|---|---|
| CAHTS | 8542390000 |
| BRHTS | 85423999 |
| INHTS | 85423900 |
| MXHTS | 8542.39.99 |
Sourcing Information
Need SN65HVD1781DR from Texas Instruments for your next order? SZ Procure provides local sourcing support in Shenzhen — we help buyers check supplier availability, compare quotations, and coordinate procurement for China-sourced components.
Our Shenzhen sourcing team can help with supplier sourcing, availability checks and quotation comparison for SN65HVD1781DR, then coordinate procurement, supplier screening, inspection and international shipping based on what you need.
Ready to source SN65HVD1781DR? Send your requirement through Request a Quote and we'll help check sourcing options and procurement costs.