S9KEAZ128AMLK
Microcontrollers
Manufacturer
MPN
S9KEAZ128AMLK
Product Type
Core Processor
ARM Cortex-M0+
Maximum Clock Speed
48 MHz
Package / Case
LQFP-80
Datasheet
Technical Specifications
| Type | Description |
|---|---|
| Core Processor | ARM Cortex-M0+ |
| Core Bits | 32 |
| Maximum Clock Speed | 48 MHz |
| Flash Memory | 128 KB |
| Number of I/O | 71 |
| Flash Type | FLASH |
| Type | Description |
|---|---|
| Adc Bits | 12.0 |
| Oscillator Type | Built-in |
| Eeprom Bytes | - |
| Operating Temp | -40°C ~ +125°C |
| Working Voltage V | 4.1 V |
| Package / Case | LQFP-80 |
Product Introduction
ARM Cortex-M0+ 32 Bit 48MHz LQFP-80(14x14) Microcontrollers RoHS
Features
- Operating Range:
- Voltage range: 2.7 to 5.5 V
- Flash programming voltage range: 2.7 to 5.5 V
- Temperature range (ambient): -40 to 125°C
- Performance:
- ARM Cortex-M0+ core up to 48 MHz
- Single-cycle 32-bit × 32-bit multiplier
- Single-cycle I/O access port
- Oscillator (OSC): Supports 32.768 kHz crystal or 4 MHz to 24 MHz crystal or ceramic resonator; selectable low-power or high-gain oscillator
- Internal Clock Source (ICS): Composed of internal or external reference clock source and internal FLL; internal 37.5 kHz pre-calibrated reference clock source available for 48 MHz system clock
- Internal 1 kHz low-power oscillator (LPO)
- System Peripherals:
- Power Management Controller (PMC) with three power modes: Run, Wait, and Stop; resettable, interruptible low-voltage detection (LVD) module with selectable trip point
- Watchdog (WDOG) with independent clock source; configurable CRC module
- Serial Wire Debug (SWD) interface
- SRAM bit-band region (BIT-BAND)
- Bit Manipulation Engine (BME)
- Security and Integrity Module: 80-bit unique ID per device
- Human-Machine Interface:
- Up to 71 GPIO
- Two 32-bit keyboard interrupt (KBI) modules
- External interrupt (IRQ) module
- Analog Modules:
- One 12-bit SAR ADC with up to 16 channels, operable in Stop mode, with selectable hardware trigger source (ADC)
- Two analog comparators (ACMP) with 6-bit DAC and configurable reference input
- Timers:
- One 6-channel FlexTimer/PWM (FTM)
- Two 2-channel FlexTimer/PWM (FTM)
- One 2-channel periodic interrupt timer (PIT)
- One pulse width timer (PWT)
- One real-time clock (RTC)
- Communication Interfaces:
- Two SPI modules (SPI)
- Up to three UART modules (UART)
- Two I²C modules (I²C)
- One MSCAN module (MSCAN)
- Package Options:
- 80-pin LQFP
- 64-pin LQFP
Datasheet
Alternative Parts
Common S9KEAZ128AMLK alternatives overseas buyers search for:
Compliance & Export Codes
| Type | Details |
|---|---|
| RoHS | ROHS3 |
| ECCN | 3A991A2 |
| Type | Details |
|---|---|
| CNHTS | 8542319090 |
Sourcing Information
Looking for a reliable source for S9KEAZ128AMLK from NXP Semiconductors? SZ Procure is a China electronics sourcing partner, helping international buyers source components through our supplier network in Shenzhen.
Our Shenzhen sourcing team can help with supplier sourcing, availability checks and quotation comparison for S9KEAZ128AMLK, then coordinate procurement, supplier screening, inspection and international shipping based on what you need.
Looking to source S9KEAZ128AMLK? Submit an RFQ and let our Shenzhen sourcing team check available supplier options for you.