S32K322EHT0MPBST
Microcontrollers
Technical Specifications
| Type | Description |
|---|---|
| Core Processor | ARM Cortex-M7 |
| Core Size | 32 bit |
| Maximum Clock Speed | 160 MHz |
| Program Storage Size | 2 MB |
| Number of I/O | 143 |
| Flash Type | FLASH |
| Type | Description |
|---|---|
| Oscillator Type | Built-in+External |
| EEPROM | 128 KB |
| Operating Temperature | -40°C~+125°C |
| Supply Voltage | 2.97V~5.5V |
| Package / Case | QFP-172(16x16) |
Features
- Arm Cortex-M7 core, 32-bit CPU — M7 supports up to 320 MHz frequency with 2.14 DMIPS / MHz
- Arm Core based on the Armv7 and Thumb-2 ISA
- Integrated Digital Signal Processor (DSP)
- Configurable Nested Vectored Interrupt Controller (NVIC)
- Single Precision Floating Point Unit (FPU)
- 8 - 40 MHz Fast External Oscillator (FXOSC)
- 48 MHz Fast Internal RC oscillator (FIRC)
- 32 kHz Low Power Oscillator (SIRC)
- 32 kHz Slow External Oscillator (SXOSC) System Phased Lock Loop (SPLL)
- LQFP48, HDQFP100, HDQFP172, MAPBGA257, MAPBGA289, HDQFP172 with Exposed pad (EP) package options
- Up to 32-channel DMA with up to 128 request sources using DMAMUX
- Up to 8 MB program flash memory with ECC
- Up to 128 K of flexible program or data flash memory
- Up to 1152 KB SRAM with ECC, includes 384 KB of TCM RAM ensuring maximum CPU performance of fast control loops with minimal latency
- Data and instruction cache for each core to minimize performance impact of memory access latencies
- QuadSPI support
- Up to three 12-bit Analog-to-Digital Converters (ADC) with up to 24 channel analog inputs per module
- One Temperature Sensor (TempSense)
- Up to three Analog Comparators (CMP), with each comparator having an internal 8-bit DAC
- Up to 235 GPIO pins
- Non-Maskable Interrupt (NMI)
- Up to 60 pins with wakeup capability
- Up to 32 pins with interrupt support
- Low-power Arm Cortex-M7 core with excellent energy efficiency, balanced with performance
- Power Management Controller (PMC) with simplified mode management (RUN and STANDBY)
- Supports peripheral specific clock gating. Only specific peripherals remain working in low power modes.
- Up to 16 serial communication interface (LPUART) modules, with LIN, UART and DMA support
- Up to six Low Power Serial Peripheral Interface (LPSPI) modules with DMA support
- Up to two Low Power Inter-Integrated Circuit (LPI2C) modules with DMA support
- Up to eight FlexCAN modules (with optional CANFD support)
- FlexIO module for flexible and high performance serial interfaces
- Up to two Ethernet modules
- Up to two Synchronous Audio Interface (SAI) modules
- Hardware Security Engine (HSE_B) - Supports AES accelerator(for K388 only)
- Up to two Internal Software Watchdog Timers (SWT)
- Error-Correcting Code (ECC) on all memories
- Error Detection Code (EDC) on data path
- Cyclic Redundancy Check (CRC) module
- 120-bit Unique Identification (ID) number
- Extended Cross domain Domain Controller (XRDC), providing protection for master core access rights
- Virtualization Wrapper (VIRT_WRAPPER), providing I/O protection
- Serial Wire JTAG debug Port (SWJ-DP), with 2 pin Serial Wire Debug (SWD) for external debugger
- Debug Watchpoint and Trace (DWT), with four configurable comparators as hardware watchpoints
- Serial Wire Output (SWO)-synchronous trace data support
- Instrumentation Trace Macrocell (ITM) with software and hardware trace, plus time stamping
- CoreSight AHB Trace Macrocell (HTM)
- Flash Patch and Breakpoints (FPB) with ability to patch code and data from code space to system space
- Serial Wire Viewer (SWV): A trace capability providing displays of reads, writes, exceptions, PC Samples and print
- Full data trace for up to 16 output wide
- Embedded Cross Trigger (ECT) is used for multicore run-control and trace cross triggering, using CoreSight Cross Trigger Interface (CTI)
- Up to three enhanced modular I/O system (eMIOS), offering up to 72 timer channels (IC/OC/PWM)
- Up to two System Timer Modules (STM)
- Up to two Logic Control Units (LCU)
- Full cross triggering support for ADC / timer (BCTU)
- One Trigger MUX Control (TRGMUX) module
- Up to three Periodic Interrupt Timer (PIT) modules
- 32-bit Real Time Counter (RTC) with autonomous periodic interrupt (API) function
Applications
- Wide range of applications in harsh electrical environments
- Cost-sensitive applications
- Automotive industry
Datasheet
📄 Open Download
Inline preview not available
This datasheet is hosted by the manufacturer, who does not allow it to be embedded. Open the official PDF on www.nxp.com:
Open on www.nxp.comAlternative Parts
Common S32K322EHT0MPBST alternatives overseas buyers search for:
Compliance & Export Codes
| Type | Details |
|---|---|
| RoHS | ROHS3 |
| ECCN | EAR99 |
| Type | Details |
|---|---|
| CNHTS | 8542319090 |
Sourcing Information
Need S32K322EHT0MPBST from NXP Semiconductors for your next order? SZ Procure provides local sourcing support in Shenzhen — we help buyers check supplier availability, compare quotations, and coordinate procurement for China-sourced components.
For S32K322EHT0MPBST, we can check current supplier availability, compare quotations from multiple sources, coordinate purchasing, and arrange pre-shipment inspection and shipment consolidation according to your requirements.
Looking to source S32K322EHT0MPBST? Submit an RFQ and let our Shenzhen sourcing team check available supplier options for you.