RC0603FR-071KL
Chip Resistor - Surface Mount
Technical Specifications
| Type | Description |
|---|---|
| Resistance | 1000 Ω |
| Tolerance | 1 % |
| Maximum Voltage | 75 V |
| Power W | 0.1 W |
| Rated Voltage | 75 V |
| Type | Description |
|---|---|
| Operating Temp | -55°C ~ +155°C |
| Type | Thick Film Resistor |
| Temperature Coefficient | +/-100ppm/°C |
| Package / Case | 0603 |
Product Introduction
100mW 1kΩ 75V Thick Film Resistor ±100ppm/℃ ±1% 0603 Chip Resistor - Surface Mount RoHS
Datasheet
Alternative Parts
Common RC0603FR-071KL alternatives overseas buyers search for:
- AC0603FR-071KL (request quote)
- AF0603FR-071KL (request quote)
- AC0603DR-071KL (request quote)
- RC0603DR-071KL (request quote)
- RT0603FRE071KL (request quote)
- RT0603FRE131KL (request quote)
- AT0603FRE071KL (request quote)
- RE0603FRE071KL (request quote)
- RC0603FR-131KL (request quote)
- AF0603DR-071KL (request quote)
- RC0603FR-071KP (request quote)
- SR0603FR-071KL (request quote)
- AC0603FR-131KL (request quote)
- AF0603FR-131KL (request quote)
- AR0603FR-071KL (request quote)
- AC0603FR-7W1KL (request quote)
- SR0603FR-7W1KL (request quote)
- SR0603FR-7T1KL (request quote)
- RT0603FRD071KL (request quote)
- AA0603FR-131KL (request quote)
Compliance & Export Codes
| Type | Details |
|---|---|
| RoHS | ROHS3 |
| ECCN | EAR99 |
| CNHTS | 8533211000 |
| USHTS | 8533210020 |
| TARIC | 8533210000 |
| Type | Details |
|---|---|
| CAHTS | 8533210000 |
| BRHTS | 85332110 |
| INHTS | 85332111 |
| MXHTS | 8533.21.01 |
Frequently Asked Questions
How Much Power Can the AMS1117-3.3 Handle in an SOT-223 Package Without Overheating?
Power dissipation is calculated as . For the SOT-223 package, the thermal resistance () is approximately . If you drop 5V to 3.3V at 500mA, the is 0.85W, raising the junction temperature by . To reach the full 1A output, you must provide adequate PCB copper pours as a heat sink. If the differential voltage is high (e.g., 12V to 3.3V), the current must be significantly derated to prevent thermal shutdown.
What Is the Minimum Input Voltage Required for the AMS1117-3.3 (C22548) to Provide a Stable 3.3V Output?
The AMS1117-3.3 is a Low Dropout (LDO) regulator with a typical dropout voltage of 1.1V to 1.3V at 1A load. To ensure a regulated 3.3V output, the input voltage () must be at least 4.5V to 4.6V (). While it can technically handle up to 15V input, using a 5V supply is ideal for minimizing heat dissipation while maintaining regulation.
What Are the Recommended Capacitors for the AMS1117-3.3 to Prevent Circuit Oscillation?
Stability in the AMS1117-3.3 requires an output capacitor with a specific Equivalent Series Resistance (ESR). It is highly recommended to use at least a 22µF Tantalum or Electrolytic capacitor on the output. While Ceramic capacitors are popular, their ultra-low ESR can sometimes cause LDO oscillation; if using ceramics, adding a small series resistor (0.5Ω) or ensuring a minimum of 10µF is crucial for frequency compensation and transient response.
Sourcing Information
Sourcing RC0603FR-071KL from China? SZ Procure helps international buyers navigate the Shenzhen electronics market and locate suitable supplier options for specific component requirements.
When you need RC0603FR-071KL, SZ Procure can look into supplier options, confirm current availability, compare sourcing quotes and handle purchasing, pre-shipment inspection and consolidated shipment from Shenzhen.
Need RC0603FR-071KL? Send us your required quantity and specifications for a sourcing check and quotation.