PIC32MX470F512L-I/PF
Microcontrollers
Manufacturer
MPN
PIC32MX470F512L-I/PF
Product Type
Core Processor
MIPS32 M4K
Maximum Clock Speed
80 MHz
Package / Case
TQFP-100
Datasheet
Key Attributes
32-bit Microcontrollers with Audio/Graphics/Touch (HMI), USB, and Advanced Analog
Technical Specifications
| Type | Description |
|---|---|
| Core Processor | MIPS32 M4K |
| Core Bits | 32 |
| Maximum Clock Speed | 80 MHz |
| Flash Memory | 512 KB |
| Number of I/O | 81 |
| Flash Type | FLASH |
| Type | Description |
|---|---|
| Adc Bits | 10.0 |
| Oscillator Type | Built-in |
| Eeprom Bytes | - |
| Operating Temp | -40°C ~ +85°C |
| Working Voltage V | 2.95 V |
| Package / Case | TQFP-100 |
Product Introduction
MIPS32 M4K 32 Bit 80MHz TQFP-100(14x14) Microcontrollers RoHS
Features
- MIPS16e mode for up to 40% smaller code size
- Code-efficient (C and Assembly) architecture
- Single-cycle (MAC) 32x16 and two-cycle 32x32 multiply
- 0.9% internal oscillator
- Programmable PLLs and oscillator clock sources
- Fail-Safe Clock Monitor (FSCM)
- Independent Watchdog Timer
- Fast wake-up and start-up
- Low-power management modes (Sleep and Idle)
- Integrated Power-on Reset, Brown-out Reset, and High Voltage Detect
- 0.5 mA/MHz dynamic current (typical), 50 μA IPD current (typical)
- External graphics interface with up to 34 PMP pins
- Audio data communication: I²S, LJ, RJ, USB
- Audio data control interface: SPI and I²C
- Audio data master clock: Generation of fractional clock frequencies, Can be synchronized with USB clock, Can be tuned in run-time
- Charge Time Measurement Unit (CTMU): Supports mTouch capacitive touch sensing, Provides high-resolution time measurement (1 ns)
- 10-bit 1 Msps rate with one Sample and Hold (S&H)
- Up to 28 analog inputs
- Can operate during Sleep mode
- Flexible and independent ADC trigger sources
- On-chip temperature measurement capability
- Two dual-input Comparator modules
- Programmable references with 32 voltage points
- Five General Purpose Timers: Five 16-bit and up to two 32-bit Timers/Counters
- Five Output Compare (OC) modules
- Five Input Capture (IC) modules
- Peripheral Pin Select (PPS) to allow function remap
- Real-Time Clock and Calendar (RTCC) module
- USB 2.0-compliant Full-speed OTG controller
- Up to five UART modules (20 Mbps): LIN 2.1 protocols and IrDA support
- Two 4-wire SPI modules (25 Mbps)
- Two I²C modules (up to 1 Mbaud) with SMBus support
- PPS to allow function remap
- Parallel Master Port (PMP)
- Four channels of hardware DMA with automatic data size detection
- 32-bit Programmable Cyclic Redundancy Check (CRC)
- Two additional channels dedicated to USB
- 15 mA or 12 mA source/sink for standard VoH/VoL and up to 22 mA for non-standard VoH1
- 5V-tolerant pins
- Selectable open drain, pull-ups, and pull-downs
- External interrupts on all I/O pins
- Class B Safety Library, IEC 60730
- In-circuit and in-application programming
- 4-wire MIPS Enhanced JTAG interface
- Unlimited program and six complex data breakpoints
- IEEE 1149.2-compatible (JTAG) boundary scan
Datasheet
Alternative Parts
Common PIC32MX470F512L-I/PF alternatives overseas buyers search for:
Compliance & Export Codes
| Type | Details |
|---|---|
| RoHS | ROHS3 |
| ECCN | 3A991A2 |
| Type | Details |
|---|---|
| CNHTS | 8542319090 |
Sourcing Information
Sourcing PIC32MX470F512L-I/PF from China? SZ Procure helps international buyers navigate the Shenzhen electronics market and locate suitable supplier options for specific component requirements.
For PIC32MX470F512L-I/PF, we can check current supplier availability, compare quotations from multiple sources, coordinate purchasing, and arrange pre-shipment inspection and shipment consolidation according to your requirements.
Need PIC32MX470F512L-I/PF? Send us your required quantity and specifications for a sourcing check and quotation.