PIC18F45J10-I/PT
Microcontrollers
Manufacturer
MPN
PIC18F45J10-I/PT
Product Type
Core Processor
PIC
Maximum Clock Speed
40 MHz
Package / Case
TQFP-44
Datasheet
Key Attributes
Pin High-Performance RISC Microcontrollers with nanoWatt Technology
Technical Specifications
| Type | Description |
|---|---|
| Core Processor | PIC |
| Core Bits | 8 |
| Maximum Clock Speed | 40 MHz |
| Flash Memory | 32 KB |
| Number of I/O | 32 |
| Flash Type | FLASH |
| Type | Description |
|---|---|
| Adc Bits | 10.0 |
| Oscillator Type | Built-in |
| Eeprom Bytes | - |
| Operating Temp | -40°C ~ +85°C |
| Working Voltage V | 3.15 V |
| Package / Case | TQFP-44 |
Product Introduction
PIC 8 Bit 40MHz TQFP-44(10x10) Microcontrollers RoHS
Features
- Operating voltage range: 2.0V to 3.6V
- 5.5V tolerant inputs (digital pins only)
- On-chip 2.5V voltage regulator
- Low-power, high-speed CMOS Flash technology
- C compiler optimized architecture:
- Optional extended instruction set designed to optimize re-entrant code
- Interrupt priority levels
- 8×8 single-cycle hardware multiplier
- Enhanced Watchdog Timer (WDT):
- Programmable period from 4 ms to 131s
- Single-supply In-Circuit Serial Programming (ICSP) via two pins
- In-Circuit Debugging (ICD) via two pins with three breakpoints
- Power management modes:
- Run: CPU on, peripherals on
- Idle: CPU off, peripherals on
- Sleep: CPU off, peripherals off
- Flexible oscillator structure:
- Two crystal modes up to 40 MHz
- Two external clock modes up to 40 MHz
- Internal 31 kHz oscillator
- Secondary oscillator using Timer1 @ 32 kHz
- Two-speed oscillator start-up
- Fail-Safe Clock Monitor: allows safe shutdown if peripheral clock stops
- Peripheral highlights:
- High-current sink/source 25 mA/25 mA (PORTB and PORTC)
- Three programmable external interrupts
- Four input change interrupts
- One Capture/Compare/PWM (CCP) module
- One Enhanced Capture/Compare/PWM (ECCP) module:
- One, two, or four PWM outputs
- Selectable polarity
- Programmable dead-band time
- Auto-shutdown and auto-restart
- Two Master Synchronous Serial Port (MSSP) modules supporting 3-wire SPI (all 4 modes) and I²C master/slave mode
- One Enhanced Addressable USART module:
- Supports RS-485, RS-232, and LIN 1.2
- Auto-wake-up on Start bit
- Auto-baud rate detection
- 10-bit, up to 13-channel Analog-to-Digital Converter (A/D) module:
- Auto-acquisition capability
- Conversion during Sleep
- Auto-calibration
- Dual analog comparators with input multiplexing
Datasheet
Alternative Parts
Common PIC18F45J10-I/PT alternatives overseas buyers search for:
Compliance & Export Codes
| Type | Details |
|---|---|
| RoHS | ROHS3 |
| ECCN | 3A991A2 |
| Type | Details |
|---|---|
| CNHTS | 8542319090 |
Sourcing Information
Need PIC18F45J10-I/PT from Microchip Technology for your next order? SZ Procure provides local sourcing support in Shenzhen — we help buyers check supplier availability, compare quotations, and coordinate procurement for China-sourced components.
When you need PIC18F45J10-I/PT, SZ Procure can look into supplier options, confirm current availability, compare sourcing quotes and handle purchasing, pre-shipment inspection and consolidated shipment from Shenzhen.
Need PIC18F45J10-I/PT? Send us your required quantity and specifications for a sourcing check and quotation.