PIC18F26K80-I/SS
Microcontrollers
Manufacturer
MPN
PIC18F26K80-I/SS
Product Type
Core Processor
PIC
Maximum Clock Speed
64 MHz
Package / Case
SSOP-28-208mil
Datasheet
Key Attributes
Enhanced Flash Microcontrollers with ECAN and nano Watt XLP Technology
Technical Specifications
| Type | Description |
|---|---|
| Core Processor | PIC |
| Core Bits | 8 |
| Maximum Clock Speed | 64 MHz |
| Flash Memory | 64 KB |
| Number of I/O | 24 |
| Flash Type | FLASH |
| Type | Description |
|---|---|
| Adc Bits | 12.0 |
| Oscillator Type | Built-in |
| Eeprom Bytes | 1 KB |
| Operating Temp | -40°C ~ +85°C |
| Working Voltage V | 3.65 V |
| Package / Case | SSOP-28-208mil |
Product Introduction
PIC 8 Bit 64MHz SSOP-28-208mil Microcontrollers RoHS
Features
- Run: CPU on, Peripherals on
- Idle: CPU off, Peripherals on
- Sleep: CPU off, Peripherals off
- Two-Speed Oscillator Start-up
- Fail-Safe Clock Monitor (FSCM)
- Power-Saving Peripheral Module Disable (PMD)
- Ultra Low-Power Wake-up
- Fast Wake-up, 1 μs, Typical
- Low-Power WDT, 300 nA, Typical
- Run mode Currents Down to Very Low 3.8 μA, Typical
- Idle mode Currents Down to Very Low 880 nA, Typical
- Sleep mode Current Down to Very Low 13 nA, Typical
- Conforms to CAN 2.0B Active Specification
- Three Operating modes: - Legacy mode (full backward compatibility with existing PIC18CXX8/FXX8 CAN modules) - Enhanced mode - FIFO mode or programmable TX/RX buffers
- Message Bit Rates up to 1 Mbps
- DeviceNet Data Byte Filter Support
- Six Programmable Receive/Transmit Buffers
- Three Dedicated Transmit Buffers with Prioritization
- Two Dedicated Receive Buffers
- 16 Full, 29-Bit Acceptance Filters with Dynamic Association
- Three Full, 29-Bit Acceptance Masks
- Automatic Remote Frame Handling
- Advanced Error Management Features
- Operating Voltage Range: 1.8V to 5.5V
- On-Chip 3.3V Regulator
- Operating Speed up to 64 MHz
- Up to 64 Kbytes On-Chip Flash Program Memory: - 10,000 erase/write cycle, typical - 20 years minimum retention, typical
- 1,024 Bytes of Data EEPROM: - 100,000 Erase/write cycle data EEPROM memory, typical
- 3.6 Kbytes of General Purpose Registers (SRAM)
- Three Internal Oscillators: LF-INTOSC (31 KHz), MF-INTOSC (500 kHz) and HF-INTOSC (16 MHz)
Datasheet
Alternative Parts
Common PIC18F26K80-I/SS alternatives overseas buyers search for:
- PIC18F26K80T-I/SS (request quote)
- PIC18F26K80-E/SS (request quote)
- PIC18F26K22-I/SS (request quote)
- PIC18F26K20-I/SS (request quote)
- PIC18LF26K22T-I/SS (request quote)
- PIC18LF26K80-I/SS (request quote)
- PIC18F26K22T-I/SS (request quote)
- PIC18LF26K22-I/SS (request quote)
- PIC18F26K20T-I/SS (request quote)
- PIC18LF26K80T-I/SS (request quote)
Compliance & Export Codes
| Type | Details |
|---|---|
| RoHS | ROHS3 |
| ECCN | 3A991A2 |
| Type | Details |
|---|---|
| CNHTS | 8542319090 |
Sourcing Information
Need PIC18F26K80-I/SS from Microchip Technology for your next order? SZ Procure provides local sourcing support in Shenzhen — we help buyers check supplier availability, compare quotations, and coordinate procurement for China-sourced components.
Our Shenzhen sourcing team can help with supplier sourcing, availability checks and quotation comparison for PIC18F26K80-I/SS, then coordinate procurement, supplier screening, inspection and international shipping based on what you need.
Looking to source PIC18F26K80-I/SS? Submit an RFQ and let our Shenzhen sourcing team check available supplier options for you.