Microchip Technology

PIC16F1503T-I/SL

Microcontrollers

MPN
PIC16F1503T-I/SL
Product Type
Core Processor
PIC
Maximum Clock Speed
20 MHz
Package / Case
SOIC-14
Key Attributes
14-Pin Flash, 8-Bit Microcontrollers

Technical Specifications

TypeDescription
Core ProcessorPIC
Core Bits8
Maximum Clock Speed20 MHz
Flash Memory3.5 KB
Number of I/O11
Flash TypeFLASH
TypeDescription
Adc Bits10.0
Oscillator TypeBuilt-in
Eeprom Bytes-
Operating Temp-40°C ~ +85°C
Working Voltage V3.9 V
Package / CaseSOIC-14

Product Introduction

PIC 8 Bit 20MHz SOIC-14 Microcontrollers RoHS

Features

  • C Compiler Optimized Architecture
  • Only 49 Instructions
  • Operating Speed: - DC – 20 MHz clock input - DC – 200 ns instruction cycle
  • Interrupt Capability with Automatic Context Saving
  • 16-Level Deep Hardware Stack with Optional Overflow/Underflow Reset
  • Direct, Indirect and Relative Addressing modes: - Two full 16-bit File Select Registers (FSRs) - FSRs can read program and data memory
  • 16 MHz Internal Oscillator Block: - Factory calibrated to ±1%, typical - Software selectable frequency range from 16 MHz to 31 kHz
  • 31 kHz Low-Power Internal Oscillator
  • Three External Clock modes up to 20 MHz
  • Operating Voltage Range: - 1.8V to 3.6V (PIC16LF1503) - 2.3V to 5.5V (PIC16F1503)
  • Self-Programmable under Software Control
  • Power-on Reset (POR)
  • Power-up Timer (PWRT)
  • Programmable Low-Power Brown-out Reset (LPBOR)
  • Extended Watchdog Timer (WDT): - Programmable period from 1 ms to 256s
  • Programmable Code Protection
  • In-Circuit Serial Programming™ (ICSP™) via Two Pins
  • Enhanced Low-Voltage Programming (LVP)
  • In-Circuit Debug (ICD) via Two Pins
  • Power-Saving Sleep mode: - Low-Power Sleep mode - Low-Power BOR (LPBOR)
  • Integrated Temperature Indicator
  • 128 Bytes High-Endurance Flash - 100,000 write Flash endurance (minimum)
  • 2 Kwords Linear Program Memory Addressing
  • 128 bytes Linear Data Memory Addressing High-Endurance Flash Data Memory (HEF) - 128 bytes if nonvolatile data storage - 100k erase/write cycles
  • Sleep Current: - 20 nA @1.8V, typical
  • Watchdog Timer Current: - 260 nA @1.8V, typical
  • Operating Current: - 30 μA/Hz @ 1.8V, typical
  • Analog-to-Digital Converter (ADC): - 10-bit resolution - Eight external channels - Three internal channels: - Fixed Voltage Reference - Digital-to-Analog Converter (DAC) - Temperature Indicator channel - Auto acquisition capability - Conversion available during Sleep
  • 5-Bit Digital-to-Analog Converter (DAC): - Output available externally - Positive reference selection - Internal connections to comparators and ADC
  • Two Comparators: - Rail-to-rail inputs - Power mode control - Software controllable hysteresis
  • Voltage Reference: - 1.024V Fixed Voltage Reference (FVR) with 1x, 2x and 4x Gain output levels
  • 12 I/O Pins (1 Input-only Pin): - High current sink/source 25 mA/25 mA - Individually programmable weak pull-ups - Individually programmable Interrupt-on-Change (IOC) pins
  • Timer0: 8-Bit Timer/Counter with 8-Bit Programmable Prescaler
  • Enhanced Timer1: - 16-bit timer/counter with prescaler - External Gate Input mode
  • Timer2: 8-Bit Timer/Counter with 8-Bit Period Register, Prescaler and Postscaler
  • Four 10-bit PWM modules
  • Master Synchronous Serial Port (MSSP) with SPI and I²C with: - 7-bit address masking - SMBus/PMBus™ compatibility
  • Two Configurable Logic Cell (CLC) modules: - 16 selectable input source signals - Four inputs per module - Software control of combinational/sequential logic/state/clock functions - AND/OR/XOR/D Flop/D Latch/SR/JK - Inputs from external and internal sources - Output available to pins and peripherals - Operation while in Sleep
  • Numerically Controlled Oscillator (NCO): - 20-bit accumulator - 16-bit increment - True linear frequency control - High-speed clock input - Selectable Output modes - Fixed Duty Cycle (FDC) mode - Pulse Frequency (PF) mode
  • Complementary Waveform Generator (CWG): - Eight selectable signal sources - Selectable falling and rising edge dead-band control - Polarity control - Four auto-shutdown sources - Multiple input sources: PWM, CLC, NCO

Datasheet

📄 Open Download

Alternative Parts

Common PIC16F1503T-I/SL alternatives overseas buyers search for:

Compliance & Export Codes

TypeDetails
RoHSROHS3
ECCNEAR99
TypeDetails
CNHTS8542319090

Sourcing Information

Looking for a reliable source for PIC16F1503T-I/SL from Microchip Technology? SZ Procure is a China electronics sourcing partner, helping international buyers source components through our supplier network in Shenzhen.

Our Shenzhen sourcing team can help with supplier sourcing, availability checks and quotation comparison for PIC16F1503T-I/SL, then coordinate procurement, supplier screening, inspection and international shipping based on what you need.

Need PIC16F1503T-I/SL? Send us your required quantity and specifications for a sourcing check and quotation.