PIC12F1501-I/SN
Microcontrollers
Manufacturer
MPN
PIC12F1501-I/SN
Product Type
Core Processor
PIC
Maximum Clock Speed
20 MHz
Package / Case
SOIC-8
Datasheet
Key Attributes
8-Pin Flash, 8-Bit Microcontrollers
Technical Specifications
| Type | Description |
|---|---|
| Core Processor | PIC |
| Core Bits | 8 |
| Maximum Clock Speed | 20 MHz |
| Flash Memory | 1.75 KB |
| Number of I/O | 5 |
| Flash Type | FLASH |
| Type | Description |
|---|---|
| Adc Bits | 10.0 |
| Oscillator Type | Built-in |
| Eeprom Bytes | - |
| Operating Temp | -40°C ~ +85°C |
| Working Voltage V | 3.9 V |
| Package / Case | SOIC-8 |
Product Introduction
PIC 8 Bit 20MHz SOIC-8 Microcontrollers RoHS
Features
- C Compiler Optimized Architecture
- Only 49 Instructions
- Operating Speed: DC – 20 MHz clock input, DC – 200 ns instruction cycle
- Interrupt Capability with Automatic Context Saving
- 16-Level Deep Hardware Stack with Optional Overflow/Underflow Reset
- Direct, Indirect and Relative Addressing modes: Two full 16-bit File Select Registers (FSRs), FSRs can read program and data memory
- 16 MHz Internal Oscillator Block: Factory calibrated to ±1%, typical, Software selectable frequency range from 16 MHz to 31 kHz
- 31 kHz Low-Power Internal Oscillator
- Three External Clock modes up to 20 MHz
- Operating Voltage Range: 1.8V to 3.6V (PIC12LF1501), 2.3V to 5.5V (PIC12F1501)
- Self-Programmable under Software Control
- Power-on Reset (POR)
- Power-up Timer (PWRT)
- Programmable Low-Power Brown-out Reset (LPBOR)
- Extended Watchdog Timer (WDT): Programmable period from 1 ms to 256s
- Programmable Code Protection
- In-Circuit Serial Programming (ICSP) via Two Pins
- Enhanced Low-Voltage Programming (LVP)
- In-Circuit Debug (ICD) via Two Pins
- Power-Saving Sleep mode: Low-Power Sleep mode, Low-Power BOR (LPBOR)
- Integrated Temperature Indicator
- 128 Bytes High-Endurance Flash: 100,000 write Flash endurance (minimum)
- 1 Kwords Linear Program Memory Addressing
- 64 bytes Linear Data Memory Addressing
- High-Endurance Flash Data Memory (HEF): 128 bytes if nonvolatile data storage, 100k erase/write cycles
- Sleep Current: 20 nA @1.8V, typical
- Watchdog Timer Current: 260 nA @1.8V, typical
- Operating Current: 30 μA @ 1.8V, typical
- Analog-to-Digital Converter (ADC): 10-bit resolution, Four external channels, Three internal channels: Fixed Voltage Reference, Digital-to-Analog Converter (DAC), Temperature Indicator channel, Auto acquisition capability, Conversion available during Sleep
- 5-Bit Digital-to-Analog Converter (DAC): Output available externally, Positive reference selection, Internal connections to comparators and ADC
- One Comparator: Rail-to-rail inputs, Power mode control, Software controllable hysteresis
- Voltage Reference: 1.024V Fixed Voltage Reference (FVR) with 1x, 2x and 4x Gain output levels
- Six I/O Pins (1 Input-only Pin): High current sink/source 25 mA/25 mA, Individually programmable weak pull-ups, Individually programmable Interrupt-on-Change (IOC) pins
- Timer0: 8-Bit Timer/Counter with 8-Bit Programmable Prescaler
- Enhanced Timer1: 16-bit timer/counter with prescaler, External Gate Input mode
- Timer2: 8-Bit Timer/Counter with 8-Bit Period Register, Prescaler and Postscaler
- Four 10-bit PWM modules
- Two Configurable Logic Cell (CLC) modules: 16 selectable input source signals, Four inputs per module, Software control of combinational/sequential logic/state/clock functions, AND/OR/XOR/D Flop/D Latch/SR/JK, Inputs from external and internal sources, Output available to pins and peripherals, Operation while in Sleep
- Numerically Controlled Oscillator (NCO): 20-bit accumulator, 16-bit increment, True linear frequency control, High-speed clock input, Selectable Output modes, Fixed Duty Cycle (FDC) mode, Pulse Frequency (PF) mode
- Complementary Waveform Generator (CWG): Eight selectable signal sources, Selectable falling and rising edge dead-band control, Polarity control, Four auto-shutdown sources, Multiple input sources: PWM, CLC, NCO
Datasheet
Alternative Parts
Common PIC12F1501-I/SN alternatives overseas buyers search for:
- PIC12F1501T-I/SN (request quote)
- PIC12F1501-E/SN (request quote)
- PIC12F675-I/SN (request quote)
- PIC12F615-I/SN (request quote)
- PIC12F752-I/SN (request quote)
- PIC12F615T-I/SN (request quote)
- PIC12F752-E/SN (request quote)
- PIC12F615-E/SN (request quote)
- PIC12HV615-I/SN (request quote)
- PIC12HV752-E/SN (request quote)
- PIC12F1840-I/SN
- PIC12F752T-I/SN (request quote)
- PIC12F675T-I/SN (request quote)
- PIC12F675T-E/SN (request quote)
- PIC12F675-E/SN (request quote)
- PIC12HV615T-I/SN (request quote)
- PIC12HV752-I/SN (request quote)
- PIC12HV615-E/SN (request quote)
- PIC12HV752-E/P (request quote)
- PIC12F1840T-I/SN (request quote)
Compliance & Export Codes
| Type | Details |
|---|---|
| RoHS | ROHS3 |
| ECCN | EAR99 |
| Type | Details |
|---|---|
| CNHTS | 8542319090 |
Sourcing Information
Sourcing PIC12F1501-I/SN from China? SZ Procure helps international buyers navigate the Shenzhen electronics market and locate suitable supplier options for specific component requirements.
Our Shenzhen sourcing team can help with supplier sourcing, availability checks and quotation comparison for PIC12F1501-I/SN, then coordinate procurement, supplier screening, inspection and international shipping based on what you need.
Ready to source PIC12F1501-I/SN? Send your requirement through Request a Quote and we'll help check sourcing options and procurement costs.