PCA9505DGGY
I/O Expanders
Technical Specifications
| Type | Description |
|---|---|
| Working Voltage V | 3.9 V |
| Interface | I2C |
| Number of I/O | 40 |
| Iq A | 8e-07 |
| Interrupt Output | Interrupt Output |
| Number of Supporting Devices | 8 |
| Type | Description |
|---|---|
| Current - Output High(IOH) | 10mA |
| Operating Temp | -40°C ~ +85°C |
| Output Type | Push-pull |
| Features | Reset function;PWMOptocouplers;Built-in LED driver;Cascade and address expansion |
| Package / Case | TFSOP-56-6.1mm |
Product Introduction
The PCA9505/PCA9506 provide 40-bit parallel input/output (I/O) port expansion for I²C bus applications organized in 5 banks of 8 I/Os. At 5V supply voltage, the outputs are capable of sourcing 10 mA and sinking 15 mA with a total package load of 600 mA to allow direct driving of 40 LEDs. Any of the 40 I/O ports can be configured as an input or output. Output ports are totem-pole and their logic state changes at the Acknowledge (bank change). The PCA9505 is identical to the PCA9506 except that it includes 100 kΩ internal pull-up resistors on all the I/Os. The PCA9506 does not include the internal pullups on the I/Os to reduce power consumption when used as outputs or when the input is driven by a push-pull driver.
The device can be configured to have each input port to be masked in order to prevent it from generating interrupts when its state changes and to have the I/O data logic state to be inverted when read by the system controller.
An open-drain interrupt (INT) output pin allows monitoring of the input pins and is asserted each time a change occurs in one or several input ports (unless masked).
The Output Enable (OE) pin 3-states any I/O selected as an output and can be used as an input signal to blink or dim LEDs (PWM with frequency >80 Hz and change duty cycle).
The internal Power-On Reset (POR) or hardware reset (RESET) pin initializes the 40 I/Os as inputs. Three address select pins configure one of 8 target addresses.
The PCA9506 is available in 56-pin TSSOP and HVQFN packages, while the PCA9505 is available only in a TSSOP package. They are both specified over the -40°C to +85°C industrial temperature range.
Features
- Standard mode (100 kHz) and Fast mode (400 kHz) compatible I²C-bus serial interface
- 2.3 V to 5.5 V operation with 5.5 V tolerant I/Os
- 40 configurable I/O pins that default to inputs at power-up
- PCA9505 includes 100 kΩ internal pull-up resistors on all the I/Os
- Outputs:
- Totem-pole (10 mA source, 15 mA sink) with controlled edge rate output structure
- Active LOW output enable (OE) input pin 3-states all outputs
- Output state change on Acknowledge
- Open-drain active LOW interrupt (INT) output pin allows monitoring of logic level change of pins programmed as inputs
- Inputs:
- Programmable Interrupt Mask Control for input pins that do not require an interrupt when their states change
- Polarity Inversion register allows inversion of the polarity of the I/O pins when read
- Active LOW reset (RESET) input pin resets device to power-up default state
- 3 programmable address pins allowing 8 devices on the same bus
- Designed for live insertion
- Minimize line disturbance (I_OFF and power-up 3-state)
- Signal transient rejection (50 ns noise filter and robust I²C-bus state machine)
- Low standby current
- 40°C to +85°C operation
- ESD protection exceeds 2000 V HBM per JESD22-A114, 200 V MM per JESD22-A115, and 1000 V CDM per JESD22-C101
- Latch-up testing is done to JEDEC Standard JESD78, which exceeds 100 mA
- Offered in TSSOP56 (PCA9505, PCA9506) and HVQFN56 (PCA9506) packages
Applications
- - Servers - RAID systems - Industrial control - Medical equipment - PLCs - Cell phones - Gaming machines - Instrumentation and test measurement
Datasheet
Alternative Parts
Common PCA9505DGGY alternatives overseas buyers search for:
Compliance & Export Codes
| Type | Details |
|---|---|
| RoHS | ROHS3 |
| ECCN | EAR99 |
| CNHTS | 8542399000 |
| USHTS | 8542390001 |
| TARIC | 8542399000 |
| Type | Details |
|---|---|
| CAHTS | 8542390000 |
| BRHTS | 85423999 |
| INHTS | 85423900 |
| MXHTS | 8542.39.99 |
Sourcing Information
Looking for a reliable source for PCA9505DGGY from NXP Semiconductors? SZ Procure is a China electronics sourcing partner, helping international buyers source components through our supplier network in Shenzhen.
When you need PCA9505DGGY, SZ Procure can look into supplier options, confirm current availability, compare sourcing quotes and handle purchasing, pre-shipment inspection and consolidated shipment from Shenzhen.
Looking to source PCA9505DGGY? Submit an RFQ and let our Shenzhen sourcing team check available supplier options for you.