NCP12510BSN65T1G
Power Management
Technical Specifications
| Type | Description |
|---|---|
| Output Current | 400 mA |
| Voltage - Breakdown | - |
| Duty Cycle(Max) | 80% |
| Working Mode | PWM Modulation |
| Feedback System | Secondary-Side Feedback |
| Operating Temperature | -40°C~+125°C |
| Switching Freq Hz | 61kHz~71kHz |
| Type | Description |
|---|---|
| Pd W | - |
| Supply Voltage | 8.9V~18V |
| Topology | Flyback |
| Features | Light load efficient mode;EMI optimization (spread spectrum);Slope compensation;Hiccup current limiting;Under-voltage lockout;Soft-start;Over Voltage Protection;Short Circuit Protection;Overtemperature protection (OTP);Over Current Protection |
| Output Voltage | - |
| Package / Case | TSOP-6-1.5mm |
Product Introduction
The NCP12510 is a highly integrated PwM controller capable of delivering a rugged and high performance offline power supply in a tiny TSOP - 6 package. With a voltage supply range up to 35 V, the controller hosts a jittered 65 - kHz or 100 - kHz switching circuitry operated in peak current mode control. When the power on the secondary side starts decreasing, the controller automatically folds back its switching frequency down to a minimum level of 26kHz. As the power further goes down, the part enters skip cycle while limiting the peak current.
Over Power Protection (OPP) is a difficult exercise especially when no - load standby requirements drive the converter specifications. The proprietary integrated OPP allows harness the maximum delivered power without affecting the standby performance simply via two external resistors. An Over Voltage Protection (OVP) input is also combined on the same pin and protects the whole circuitry in case of optocoupler destruction or adverse open loop operation.
Finally, a timer - based short - circuit protection offers the best protection scheme, allowing precisely select the protection trip point without caring of a loose coupling between the auxiliary and the power windings.
NCP12510 is improved and pin compatible controller based on very popular flyback controller NCP1250.
Features
- Fixed - Frequency 65 kHz or 100kHz Current - Mode Control
- Operation Frequency Foldback Down to 26kHz and Skip - Cycle in Light Load Conditions
- Frequency Jittering in Normal and Frequency Foldback Modes
- Internal and Adjustable Over Power Protection (OPP) Circuit
- Auto - Recovery Over Voltage Protection (OVP) on the VCC Pin
- Internal and Adjustable Slope Compensation
- Internal Fixed 4 ms Soft - Start
- Auto - Recovery or Latched Short - Circuit Protection
- Pre - Short Ready for Latched OCP Version
- OVP/OTP Latch Input for Improved Robustness
- +300mA / - 500mA Source/Sink Drive Capability
- Improved Consumption
- Improved Reset Time in Latch State
- High Robustness and High ESD Capabilities
Applications
- Ac - dc Converters for TVs, Set - top Boxes and DVD Players
- Offline Adapters for Notebooks and Netbooks
Datasheet
Alternative Parts
Common NCP12510BSN65T1G alternatives overseas buyers search for:
Compliance & Export Codes
| Type | Details |
|---|---|
| RoHS | ROHS3 |
| ECCN | EAR99 |
| CNHTS | 8542399000 |
| USHTS | 8542390001 |
| TARIC | 8542399000 |
| Type | Details |
|---|---|
| CAHTS | 8542390000 |
| BRHTS | 85423999 |
| INHTS | 85423900 |
| MXHTS | 8542.39.99 |
Sourcing Information
Sourcing NCP12510BSN65T1G from China? SZ Procure helps international buyers navigate the Shenzhen electronics market and locate suitable supplier options for specific component requirements.
Our Shenzhen sourcing team can help with supplier sourcing, availability checks and quotation comparison for NCP12510BSN65T1G, then coordinate procurement, supplier screening, inspection and international shipping based on what you need.
Looking to source NCP12510BSN65T1G? Submit an RFQ and let our Shenzhen sourcing team check available supplier options for you.