N32G455CCL7
Microcontrollers (MCU/MPU)
Technical Specifications
| Type | Description |
|---|---|
| Core Processor | ARM Cortex-M4F |
| Core Size | 32 bit |
| Maximum Clock Speed | 144 MHz |
| Program Storage Size | 256 KB |
| Number of I/O | 37 |
| Flash Type | FLASH |
| Type | Description |
|---|---|
| ADC (Bit) | 12 bit |
| Oscillator Type | Built-in+External |
| DAC (Bit) | 12 bit |
| Operating Temperature | -40°C~+105°C |
| Supply Voltage | 1.8V~3.6V |
| Package / Case | LQFP-48(7x7) |
Product Introduction
The N32G455 series features a 32-bit ARM Cortex-M4F core with a maximum operating frequency of 144MHz, supporting floating-point operations and DSP instructions. It integrates up to 512KB Flash, 144KB SRAM, 4x12-bit 5Msps ADC, 4 operational amplifiers, 7 analog comparators, 2x1Msps 12-bit DAC, support for up to 24-channel capacitive touch keys, multiple U(S)ART, I2C, SPI, QSPI, USB, and CAN communication interfaces, 1x SDIO interface, and a built-in cryptographic algorithm hardware acceleration engine.
Features
- Core CPU: 32-bit ARM Cortex-M4 + FPU, single-cycle hardware multiply/divide instructions, DSP instructions and MPU support; 8KB instruction cache, Flash accelerator unit enabling zero-wait-state execution up to 144MHz, 180DMIPS
- Encrypted Memory: Up to 512KByte on-chip Flash with encrypted storage, multi-user partition management, data protection, hardware ECC, 100,000 erase/write cycles, 10-year data retention; 144KByte on-chip SRAM (including 16KByte Retention RAM) with hardware parity check support
- Clock: HSE: 4MHz~32MHz external high-speed crystal; LSE: 32.768KHz external low-speed crystal; HSI: internal high-speed RC OSC 8MHz; LSI: internal low-speed RC OSC 40KHz; on-chip high-speed PLL with 1 clock output, configurable as system clock, HSE, HSI, or post-PLL divided output
- Reset: Power-on/power-down/external pin reset; programmable low-voltage detection and reset; watchdog reset
- Communication Interfaces: 7× U(S)ART up to 4.5Mbps, including 3× USART (1×ISO7816, 1×IrDA, LIN) and 4× UART; 3× SPI up to 36MHz, 2 with I2S support; 1× QSPI up to 144Mbps; 4× I2C up to 1MHz, master/slave configurable, dual-address response in slave mode; 1× USB2.0 Full Speed Device; 2× CAN 2.0A/B; 1× SDIO supporting SD/MMC
- High-Performance Analog Interfaces: 4× 12-bit 5Msps high-speed ADC, configurable as 12/10/8/6-bit, up to 9Msps in 6-bit mode, up to 40 external single-ended input channels with differential mode support; 4× rail-to-rail op-amps with built-in up to 32× programmable gain amplifier; up to 7 high-speed analog comparators with 64-level adjustable reference; up to 24-channel capacitive touch keys with low-power wake-up; 2× 12-bit DAC at 1Msps; external independent reference voltage input; all analog interfaces support 1.8~3.6V full-voltage operation
- Up to 80 GPIOs with multiplexed functions, most 5V-tolerant
- 2× high-speed DMA controllers, each with 8 channels, arbitrary configurable source and destination addresses
- RTC with leap year perpetual calendar, alarm events, periodic wake-up, internal/external clock calibration
- Timer/Counters: 2× 16-bit advanced timers with input capture, output compare, PWM output, and quadrature encoder input, maximum control resolution 6.9nS, each with 4 independent channels (3 channels supporting 6× complementary PWM output); 4× 16-bit general-purpose timers, each with 4 independent channels, supporting input capture/output compare/PWM output; 2× 16-bit basic timers; 1× 24-bit SysTick; 1× 7-bit WWDG; 1× 12-bit IWDG
- Programming: SWD/JTAG debug interface; UART and USB Bootloader
- Security Features: On-chip cryptographic hardware acceleration engine supporting AES, DES, SHA, SM1, SM3, SM4, SM7, and MD5; Flash storage encryption; multi-user partition management (MMU); TRNG; CRC16/32; write protection (WRP), multiple read protection (RDP) levels (L0/L1/L2); secure boot, encrypted program download, secure update; clock failure detection, tamper detection
- 96-bit UID and 128-bit UCID
- Operating Conditions: Supply voltage: 1.8V~3.6V; operating temperature: -40°C~105°C; ESD: ±4KV (HBM), ±1KV (CDM)
Datasheet
Alternative Parts
Common N32G455CCL7 alternatives overseas buyers search for:
Compliance & Export Codes
| Type | Details |
|---|---|
| CNHTS | 8542319090 |
Sourcing Information
Sourcing N32G455CCL7 from China? SZ Procure helps international buyers navigate the Shenzhen electronics market and locate suitable supplier options for specific component requirements.
When you need N32G455CCL7, SZ Procure can look into supplier options, confirm current availability, compare sourcing quotes and handle purchasing, pre-shipment inspection and consolidated shipment from Shenzhen.
Looking to source N32G455CCL7? Submit an RFQ and let our Shenzhen sourcing team check available supplier options for you.