MX25U51245GMI00
Memory
Technical Specifications
| Type | Description |
|---|---|
| Maximum Clock Speed | 166 MHz |
| Memory Size | 512Mbit |
| Program / Erase Cycles | 100,000 cycles |
| Data Retention - TDR (Year) | 20 Years |
| Block Erase Time(tBE) | - |
| Write Cycle Time(tWC) | - |
| Page Programming Time (Tpp) | 150us |
| Type | Description |
|---|---|
| Standby Supply Current | - |
| Operating Temp | -40°C ~ +85°C |
| Features | - |
| Working Voltage V | 1.825 V |
| Interface | SPI |
| Package / Case | SOP-16-300mil |
Product Introduction
1.8V 512M-BIT [x 1/x 2/x 4] CMOS MXSMIO (SERIAL MULTI I/O) FLASH MEMORY
Features
- GENERAL
- Supports Serial Peripheral Interface -- Mode 0 and Mode 3
- Single Power Supply Operation - 1.65 to 2.0 volt for read, erase, and program operations
- 512Mb: 536,870,912 x 1 bit structure or 268,435,456×2 bits (two I/O mode) structure or 134,217,728×4 bits (four I/O mode) structure
- Protocol Support - Single I/O, Dual I/O and Quad I/O
- Latch-up protected to 100mA from -1V to Vcc +1V
- Fast read for SPI mode - Support fast clock frequency up to 166MHz - Support Fast Read, 2READ, DREAD, 4READ, QREAD instructions - Support DTR (Double Transfer Rate) Mode - Configurable dummy cycle number for fast read operation
- Quad Peripheral Interface (QPI) available
- Equal Sectors with 4K byte each, or Equal Blocks with 32K byte each or Equal Blocks with 64K byte each - Any Block can be erased individually
- Programming : - 256byte page buffer - Quad Input/Output page program(4PP) to enhance program performance
- Typical 100,000 erase/program cycles
- 20 years data retention
- SOFTWARE FEATURES
- Input Data Format - 1-byte Command code
- Advanced Security Features - Block lock protection The BP0-BP3 and T/B status bits define the size of the area to be protected against program and erase instructions - Advanced sector protection function
- Additional 8K bit security OTP - Features unique identifier - Factory locked identifiable, and customer lockable
- Command Reset
- Program/Erase Suspend and Resume operation Electronic Identification - JEDEC 1-byte manufacturer ID and 2-byte device ID - RES command for 1-byte Device ID - REMS command for 1-byte manufacturer ID and 1-byte device ID
- Support Serial Flash Discoverable Parameters (SFDP) mode
Datasheet
Alternative Parts
Common MX25U51245GMI00 alternatives overseas buyers search for:
- GD25LB512MEFIRR (request quote)
- S25HS512TDPMHI013 (request quote)
- S25HS512TFAMHI013 (request quote)
- S25HS512TFAMHV010 (request quote)
- S25HS512TDPMHB010 (request quote)
- S25HS512TDPMHV013 (request quote)
- S25HS512TDPMHB013 (request quote)
- S25HS512TFAMHB010 (request quote)
- S25HS512TFAMHV013 (request quote)
- S25HS512TDPMHV010 (request quote)
Compliance & Export Codes
| Type | Details |
|---|---|
| RoHS | ROHS3 |
| ECCN | 3A991B1A |
| CNHTS | 8542329000 |
| USHTS | 8542320071 |
| TARIC | 8542329000 |
| Type | Details |
|---|---|
| CAHTS | 8542330000 |
| BRHTS | 85423299 |
| INHTS | 85423200 |
| MXHTS | 8542.32.99 |
Sourcing Information
Sourcing MX25U51245GMI00 from China? SZ Procure helps international buyers navigate the Shenzhen electronics market and locate suitable supplier options for specific component requirements.
When you need MX25U51245GMI00, SZ Procure can look into supplier options, confirm current availability, compare sourcing quotes and handle purchasing, pre-shipment inspection and consolidated shipment from Shenzhen. Before ordering, the listed specification(s) — Memory Size 512Mbit — can be confirmed with the supplier against the actual part.
Ready to source MX25U51245GMI00? Send your requirement through Request a Quote and we'll help check sourcing options and procurement costs.