MX25L25645GM2I-10GTR

MX25L25645G is a 3V, 256-megabit (organized as x1/x2/x4) CMOS MXSMIO® (Serial Multi I/O) flash memory. It supports SPI modes 0 and 3, operates from a single supply voltage ranging from 2.7V to 3.6V for read, erase, and program operations. The device is organized as 268,435,456 x 1-bit, 134,217,728 x 2-bit (Dual I/O mode), or 67,108,864 x 4-bit (Quad I/O mode). It supports Single I/O, Dual I/O, and Quad I/O protocols, including DTR (Double Transfer Rate) mode, with a maximum clock frequency of 133MHz across all protocols. The device features latch-up protection with a current tolerance of 100 mA over a voltage range of -1V to Vcc+1V, and a low Vcc write inhibit voltage of 1.5V to 2.5V. It supports fast read instructions (FAST_READ, 2READ, DREAD, 4READ, QREAD), configurable dummy cycles for fast read operations, and performance-enhanced modes — XIP (Execute In Place) and QPI mode. Memory is organized into uniform 4KB sectors, or uniform blocks of 32KB or 64KB, with any block individually erasable. Programming features include a 256-byte page buffer and Quad Input/Output Page Program (4PP) for enhanced programming performance. Typical endurance is 100,000 erase/program cycles with a 20-year data retention. Software features include: 1-byte command code; advanced security features such as block protect with BP0–BP3 and T/B status bits defining protected area size; individual sector protection (solid protection); an additional 4K-bit security OTP memory with identifier, factory-lockable or customer-lockable; software reset; program/erase suspend and resume; electronic ID supporting JEDEC-standard 1-byte manufacturer ID and 2-byte device ID, RES command for reading 1-byte device ID, and REMS command for reading 1-byte manufacturer ID and 1-byte device ID; Serial Flash Discoverable Parameters (SFDP) mode support. Hardware features include: serial clock input, and serial data input or serial data I/O pins for 2x I/O and 4x I/O read modes.