MX08H
Motor Drivers, Controllers
Technical Specifications
| Type | Description |
|---|---|
| Working Voltage V | 3.5 V |
| Interface | - |
| Iq A | 1e-07 |
| Number of H-bridges | - |
| Technology | Yes |
| Peak Current | 2.5A |
| Type | Description |
|---|---|
| Features | Interleaved conduction protection;Motor stall protection;Active braking function |
| Operating Temp | -20°C ~ +85°C |
| Output Current | 1.2 A |
| Rds On Ohm | 0.425 Ω |
| Package / Case | SOP-8 |
Product Introduction
- H-bridge circuit topology with integrated N-channel and P-channel power MOSFETs, optimized for driving inductive loads such as coils and motors.
- Integrated over-temperature protection: shuts off load current when internal temperature exceeds the set threshold (typical 150°C); resumes normal operation when junction temperature drops back to the preset level (typical 130°C). Note: no short-circuit protection is provided — output-to-GND, output-to-supply, or output-to-output shorts may cause device damage. Avoid short-circuit conditions during use, or implement current-limiting measures to prevent such damage.
- Logic supply VCC and power supply VDD are fully independent internally. Route them separately in layout; do NOT connect VCC and VDD directly together, as the high voltage on VDD may damage the VCC rail.
Features
- Low standby current (< 0.1uA)
- Operating voltage range: 2V - 8.6V
- Maximum continuous output current: 1.2A (VDD = 6.5V)
- Maximum peak output current: 2.5A (VDD = 6.5V)
- Low on-resistance: 0.5Ω at 1200mA output current; 0.35Ω at 200mA output current
- Low input current — logic inputs INA\INB with integrated 15K pull-down resistors to GND
- Built-in thermal shutdown (TSD) with hysteresis
- ESD rating: 3KV (HBM)
Applications
- - Toy motor driver powered by 2 4 AA/AAA dry cell batteries - Toy motor driver powered by 2 5 NiMH/NiCd rechargeable batteries - Motor driver powered by 2-cell lithium battery
Datasheet
Compliance & Export Codes
| Type | Details |
|---|---|
| RoHS | ROHS |
| Type | Details |
|---|---|
| ECCN | - |
Sourcing Information
Looking for a reliable source for MX08H from Mixic? SZ Procure is a China electronics sourcing partner, helping international buyers source components through our supplier network in Shenzhen.
When you need MX08H, SZ Procure can look into supplier options, confirm current availability, compare sourcing quotes and handle purchasing, pre-shipment inspection and consolidated shipment from Shenzhen.
Need MX08H? Send us your required quantity and specifications for a sourcing check and quotation.