NXP Semiconductors

MKL17Z64VFM4

Microcontrollers

Manufacturer
MPN
MKL17Z64VFM4
Product Type
Core Processor
ARM Cortex-M0+
Maximum Clock Speed
48 MHz
Package / Case
QFN-32-EP
Key Attributes
Kinetis KL17 Microcontroller, 48MHz ARM Cortex - M0+ and 32/64KB Flash

Technical Specifications

TypeDescription
Core ProcessorARM Cortex-M0+
Core Bits32
Maximum Clock Speed48 MHz
Flash Memory64 KB
Number of I/O28
Flash TypeFLASH
TypeDescription
Adc Bits16.0
Oscillator TypeBuilt-in
Eeprom Bytes-
Operating Temp-40°C ~ +105°C
Working Voltage V2.655 V
Package / CaseQFN-32-EP

Product Introduction

The KL17 series is optimized for cost-sensitive and battery-powered applications requiring low-power general-purpose connectivity. The product offers:

- Embedded ROM with boot loader for flexible program upgrade

- High accuracy internal voltage and clock reference

- FlexIO to support any standard and customized serial peripheral emulation

- Down to 54uA/MHz in very low power run mode and 1.96uA in deep sleep mode (RAM + RTC retained)

Features

  • Embedded ROM with boot loader for flexible program upgrade
  • High accuracy internal voltage and clock reference
  • FlexIO to support any standard and customized serial peripheral emulation
  • Down to 54uA/MHz in very low power run mode and 1.96uA in deep sleep mode (RAM + RTC retained)
  • ARM Cortex-M0+ core up to 48 MHz
  • 128/256 KB program flash memory
  • 32 KB SRAM
  • 16 KB ROM with build-in bootloader
  • 32-byte backup register
  • 4-channel asynchronous DMA controller
  • Watchdog
  • Low-leakage wakeup unit
  • Two-pin Serial Wire Debug (SWD) programming and debug interface
  • Micro Trace Buffer
  • Bit manipulation engine
  • Interrupt controller
  • 48MHz high accuracy (up to 0.5%) internal reference clock
  • 8MHz/2MHz high accuracy (up to 3%) internal reference clock
  • 1KHz reference clock active under all low-power modes (except VLLS0)
  • 32–40KHz and 3–32MHz crystal oscillator
  • One UART module supporting ISO7816, operating up to 1.5 Mbit/s
  • Two low-power UART modules supporting asynchronous operation in low-power modes
  • Two I2C modules and I2C0 supporting up to 1 Mbit/s
  • Two 16-bit SPI modules supporting up to 24 Mbit/s
  • One FlexIO module supporting emulation of additional UART, IrDA, SPI, I2C, I2S, PWM and other serial modules, etc.
  • One serial audio interface I2S
  • One 16-bit 818 ksps ADC module with high accuracy internal voltage reference (Vref) and up to 16 channels
  • High-speed analog comparator containing a 6-bit DAC for programmable reference input
  • One 12-bit DAC
  • 1.2 V internal voltage reference
  • One 6-channel Timer/PWM module
  • Two 2-channel Timer/PWM modules
  • One low-power timer
  • Periodic interrupt timer
  • Real time clock
  • Voltage range: 1.71 to 3.6 V
  • Flash write voltage range: 1.71 to 3.6 V
  • Temperature range: -40 to 85 ℃ for WLCSP package and -40 to 105 ℃ for other packages
  • Up to 54 general-purpose input/output pins (GPIO) and 6 high-drive pad
  • Down to 54uA/MHz in very low power run mode
  • Down to 1.96uA in VLLS3 mode (RAM + RTC retained)
  • Six flexible static modes

Datasheet

📄 Open Download

Alternative Parts

Common MKL17Z64VFM4 alternatives overseas buyers search for:

Compliance & Export Codes

TypeDetails
RoHSROHS3
ECCN3A991A2
TypeDetails
CNHTS8542319090

Sourcing Information

Need MKL17Z64VFM4 from NXP Semiconductors for your next order? SZ Procure provides local sourcing support in Shenzhen — we help buyers check supplier availability, compare quotations, and coordinate procurement for China-sourced components.

Our Shenzhen sourcing team can help with supplier sourcing, availability checks and quotation comparison for MKL17Z64VFM4, then coordinate procurement, supplier screening, inspection and international shipping based on what you need.

Need MKL17Z64VFM4? Send us your required quantity and specifications for a sourcing check and quotation.