MIC5015YM
Gate Drivers
Technical Specifications
| Type | Description |
|---|---|
| Working Voltage V | 16.375 V |
| Iq A | 1.5e-05 |
| Input Logic Level - Low | 800mV |
| Rise Time | - |
| Load Type | MOSFET |
| Input Logic Level - High | 2V |
| Type | Description |
|---|---|
| Driven Configuration | High Side;Low Side |
| Current - Output Low(IOL) | - |
| Features | Enable shutdown;Charge pump boost |
| Operating Temp | -40°C ~ +150°C |
| Package / Case | SOIC-8 |
Product Introduction
MIC5014 and MIC5015 MOSFET drivers are designed for gate control of N-channel, enhancement-mode, power MOSFETs used as high-side or low-side switches. The MIC5014/5 can sustain an on-state output indefinitely.
The MIC5014/5 operates from a 2.75V to 30V supply. In highside configurations, the driver can control MOSFETs that switch loads of up to 30V. In low-side configurations, with separate supplies, the maximum switched voltage is limited only by the MOSFET.
The MIC5014/5 has a TTL compatible control input. The MIC5014 is noninverting while the MIC5015 is inverting.
The MIC5014/5 features an internal charge pump that can sustain a gate voltage greater than the available supply voltage. The driver is capable of turning on a logic-level MOSFET from a 2.75V supply or a standard MOSFET from a 5V supply. The gate-to-source output voltage is internally limited to approximately 15V.
The MIC5014/5 is protected against automotive load dump, reversed battery, and inductive load spikes of -20V. The driver’s overvoltage shutdown feature turns off the external MOSFET at approximately 35V to protect the load against power supply excursions.
The MIC5014 is an improved pin-for-pin compatible replacement in many MIC5011 applications.
The MIC5014/5 is available in plastic 8-pin DIP and 8-pin SOIC pacakges.
Features
- 2.75V to 30V operation
- 100μA maximum supply current (5V supply)
- 15μA typical off-state current
- Internal charge pump
- TTL compatible input
- Withstands 60V transient (load dump)
- Reverse battery protected to –20V
- Inductive spike protected to –20V
- Overvoltage shutdown at 35V
- Internal 15V gate protection
- Minimum external parts
- Operates in high-side or low-side configurations
- 1μA control input pull-off
- Inverting and noninverting versions
Applications
- - Automotive electrical load control - Battery-powered computer power management - Lamp control - Heater control - Motor control - Power bus switching
Datasheet
Alternative Parts
Common MIC5015YM alternatives overseas buyers search for:
Compliance & Export Codes
| Type | Details |
|---|---|
| RoHS | ROHS3 |
| ECCN | EAR99 |
| CNHTS | 8542399000 |
| USHTS | 8542390001 |
| TARIC | 8542399000 |
| Type | Details |
|---|---|
| CAHTS | 8542390000 |
| BRHTS | 85423999 |
| INHTS | 85423900 |
| MXHTS | 8542.39.99 |
Sourcing Information
Sourcing MIC5015YM from China? SZ Procure helps international buyers navigate the Shenzhen electronics market and locate suitable supplier options for specific component requirements.
When you need MIC5015YM, SZ Procure can look into supplier options, confirm current availability, compare sourcing quotes and handle purchasing, pre-shipment inspection and consolidated shipment from Shenzhen.
Ready to source MIC5015YM? Send your requirement through Request a Quote and we'll help check sourcing options and procurement costs.