MIC2544-2YM-TR
Power Distribution Switches, Load Drivers
Technical Specifications
| Type | Description |
|---|---|
| Working Voltage V | 4.1 V |
| number of channels | 1 |
| Maximum Continuous Current | 1.5A |
| Operating Temp | -40°C ~ +85°C |
| Type | Description |
|---|---|
| Features | Overcurrent Protection;Short-Circuit Protection;Over temperature protection;Reverse current blocking;Soft-start;Latch protection |
| Rds On Ohm | 0.08 Ω |
| Type | High Side Switch |
| Package / Case | SOIC-8 |
Product Introduction
The MIC2544 and MIC2548 are integrated, high-side power switches optimized for low-loss DC power switching and other power management applications, including Advanced Configuration and Power Interface (ACPI). They are cost-effective, highly integrated solutions that require few external components to satisfy USB and ACPI requirements.
Load current management features include a precision resistor-programmable output current-limit and a soft-start circuit that minimizes inrush current when the switch is enabled. Thermal shutdown, along with current-limit, protects the switch and the attached device.
The MIC2544/48’s open-drain flag output is used to indicate current-limiting or thermal shutdown to a local controller. The MIC2548 has an additional internal latch that turns the output off upon thermal shutdown, providing robust fault control. The enable signal is compatible with both 3V and 5V logic, and is also used as the thermal shutdown latch reset for the MIC2548.
The MIC2544 and MIC2548 are available in active-high and active-low enable versions in the 8-pin SOIC and 8-pin MSOP packages.
Features
- 2.7V to 5.5V Input
- Adjustable Current-Limit up to 1.5A
- Reverse Current Flow Blocking (No “Body Diode”)
- 75 μA Typical On-State Supply Current
- 1 μA Typical Off-State Supply Current
- 120 mΩ Maximum On-Resistance
- Open-Drain Fault Flag
- Thermal Shutdown
- Thermal Shutdown Output Latch (MIC2548)
- 2 ms (Slow) Turn-On and Fast Turn-Off
- Available with Active-High or Active-Low Enable
Applications
- - USB Power Distribution - PCI Bus Power Switching - Notebook PC - ACPI Power Distribution - PC Card Hot Swap Applications - Inrush Current-Limiting
Datasheet
Alternative Parts
Common MIC2544-2YM-TR alternatives overseas buyers search for:
Compliance & Export Codes
| Type | Details |
|---|---|
| RoHS | ROHS3 |
| ECCN | EAR99 |
| CNHTS | 8536500090 |
| USHTS | 8536507000 |
| TARIC | 8536500300 |
| Type | Details |
|---|---|
| CAHTS | 8536501000 |
| BRHTS | 85365090 |
| INHTS | 85365090 |
| MXHTS | 8536.50.09 |
Sourcing Information
Need MIC2544-2YM-TR from Microchip Technology for your next order? SZ Procure provides local sourcing support in Shenzhen — we help buyers check supplier availability, compare quotations, and coordinate procurement for China-sourced components.
When you need MIC2544-2YM-TR, SZ Procure can look into supplier options, confirm current availability, compare sourcing quotes and handle purchasing, pre-shipment inspection and consolidated shipment from Shenzhen.
Ready to source MIC2544-2YM-TR? Send your requirement through Request a Quote and we'll help check sourcing options and procurement costs.