MIC2544-1YMM-TR
Power Distribution Switches, Load Drivers
Technical Specifications
| Type | Description |
|---|---|
| Working Voltage V | 4.1 V |
| number of channels | 1 |
| Control Input Logic | Active High |
| Maximum Continuous Current | 1.5A |
| Operating Temp | -40°C ~ +85°C |
| Type | Description |
|---|---|
| Features | Overcurrent Protection;Short-Circuit Protection;Over temperature protection;Reverse current blocking;Soft-start;Integrated charge pump |
| Rds On Ohm | 0.08 Ω |
| Type | High Side Switch |
| Package / Case | MSOP-8 |
Product Introduction
The MIC2544 and MIC2548 are integrated, high-side power switches optimized for low-loss DC power switching and other power management applications, including Advanced Configuration and Power Interface (ACPI). They are cost-effective, highly integrated solutions that require few external components to satisfy USB and ACPI requirements.
Load current management features include a precision resistor-programmable output current-limit and a soft-start circuit that minimizes inrush current when the switch is enabled. Thermal shutdown, along with current-limit, protects the switch and the attached device.
The MIC2544/48’s open-drain flag output is used to indicate current-limiting or thermal shutdown to a local controller. The MIC2548 has an additional internal latch that turns the output off upon thermal shutdown, providing robust fault control. The enable signal is compatible with both 3V and 5V logic, and is also used as the thermal shutdown latch reset for the MIC2548.
The MIC2544 and MIC2548 are available in active-high and active-low enable versions in the 8-pin SOIC and 8-pin MSOP packages.
Features
- 2.7V to 5.5V Input
- Adjustable Current-Limit up to 1.5A
- Reverse Current Flow Blocking (No “Body Diode”)
- 75 μA Typical On-State Supply Current
- 1 μA Typical Off-State Supply Current
- 120 mΩ Maximum On-Resistance
- Open-Drain Fault Flag
- Thermal Shutdown
- Thermal Shutdown Output Latch (MIC2548)
- 2 ms (Slow) Turn-On and Fast Turn-Off
- Available with Active-High or Active-Low Enable
Applications
- - USB Power Distribution - PCI Bus Power Switching - Notebook PC - ACPI Power Distribution - PC Card Hot Swap Applications - Inrush Current-Limiting
Datasheet
Alternative Parts
Common MIC2544-1YMM-TR alternatives overseas buyers search for:
- BD82020FVJ-E2 (request quote)
- AP22818AM8-13 (request quote)
- AP2511M8-13 (request quote)
- BD82006FVJ-MGE2 (request quote)
- AP22811AM8-13 (request quote)
- AP22814BM8-13 (request quote)
- MIC2544-1YMM (request quote)
- MIC2548-1YMM-TR (request quote)
- MIC2548-1YMM (request quote)
- AP22804AM8-13 (request quote)
- BD82001FVJ-LBE2 (request quote)
- AP22814AM8-13 (request quote)
Compliance & Export Codes
| Type | Details |
|---|---|
| RoHS | ROHS3 |
| ECCN | EAR99 |
| CNHTS | 8536500090 |
| USHTS | 8536507000 |
| TARIC | 8536500300 |
| Type | Details |
|---|---|
| CAHTS | 8536501000 |
| BRHTS | 85365090 |
| INHTS | 85365090 |
| MXHTS | 8536.50.09 |
Sourcing Information
Sourcing MIC2544-1YMM-TR from China? SZ Procure helps international buyers navigate the Shenzhen electronics market and locate suitable supplier options for specific component requirements.
Our Shenzhen sourcing team can help with supplier sourcing, availability checks and quotation comparison for MIC2544-1YMM-TR, then coordinate procurement, supplier screening, inspection and international shipping based on what you need.
Need MIC2544-1YMM-TR? Send us your required quantity and specifications for a sourcing check and quotation.